Get to Know the MS621FE

What is the MS621FE?

With a silicon oxide anode and a lithium-manganese cathode, the MS621FE is a rechargeable lithium-ion button cell with reliable overdischarge properties and a long cycle life.Based on a reversible chemical reaction, the MS621FE capability enables a drained battery to be recharged and reused several times before having to be discarded. MS621FE batteries are less stable for long-term storage than primary battery equivalents because they store less energy in a given space and discharge more readily. These rechargeable batteries are typically more expensive per unit than main batteries, but because they are reusable, they are often a more cost-effective solution. Applications needing a compact, long-lasting power source are intended for the MS621FE. This 3.0 volt nominal voltage and 5 to 10 milliampere-hour (mAh) average capacity battery may power a variety of electronic devices, such as small wearable electronics, memory backups, and real-time clocks.

MS621FE Specifications

MS621FE Characteristics

Discharge(charge voltage dependence)

Dimensions

A. Large discharge capacity: suitable for high operating voltage range from 3.3v to 2.0v.

B. Long cycle life: under the charging and discharging conditions of 3.3V~2.0V, more than 100 times of charging and discharging can be achieved.

C. overdischarge characteristics: stable discharge capacity can be maintained even after over-discharge reaches 0.0V.

D. Operating temperature range:-20 degrees to +60 degrees.

Comparison with similar components in the market

MS621FE Applications

MS621FE batteries are widely used in a variety of micro-electronic products because of their small size. For a variety of electronic devices, including computer motherboards, electronic timepieces, electronic dictionaries, electronic scales, remote controls, electric toys, cardiac pacemakers, electronic hearing aids, counters, cameras, etc., they are typically utilized as a backup power source. In memory backup applications, they are also utilized to supply power in the event that the primary power source is cut off, allowing data to be stored in volatile memory. In memory backup applications, they are also utilized to give power to maintain data in volatile memory in the event that the primary power source is cut off.Manufacturers frequently choose the MS621FE battery because of its adaptability and dependability for powering a variety of consumer and business electronics.

A.Real-time clocks and timers: provide reliable timekeeping with minimal battery consumption.

B.Smart cards and key fobs: Provide long-lasting power for these compact devices.

C.Medical devices: Powering small medical implants that require high reliability.

D.Sensor Nodes: Providing low-power operation for wireless sensor networks.

E.Wearable Electronics: Offers compact and dependable power for smartwatches, fitness trackers, and other wearable devices.

F.Backup Power: Provides stable backup power for memory retention and critical settings.

Factors to Consider When Using the MS621FE

A number of things need to be taken into account while using MS621FE batteries in order to guarantee maximum life and performance. To avoid overcharging, which can shorten battery life and pose safety hazards, follow the approved charging methods. To minimise damage or deterioration at extremely high or low temperatures, consider the MS621FE's operating temperature range. For compatibility and optimum performance, the battery voltage and capacity must also comply with the instrument's specifications. By taking these considerations into account, users can maximise the longevity and reliability of MS621FE batteries in their applications.

Conclusion

All things considered, the MS621FE rechargeable lithium-ion coin cell battery offers a steady, dependable, and practical power supply for an array of electronic gadgets and uses. They are perfect for applications where size and weight are specified criteria because of their tiny size, high energy density, and rechargeable features. The MS621FE battery may offer dependable performance and long-lasting power with appropriate handling and use, helping to ensure the effective operation of electronic equipment across a range of sectors. It is crucial to remember that in order to prevent battery waste from polluting the environment, MS621FE batteries must be recycled and stored correctly. MS621FE is anticipated to be a well-liked option for producers and buyers searching for dependable power solutions for their electronic products as long as technology progresses.

FAQ

Q1: What is MS621FE used for?

The MS621FE can be used in a number of small electronic products that require extended use. For example, real-time alarm clocks, electronic watches, timers, memory backup systems and so on. It is important to note that to determine if the MS621FE is suitable for use in these electronic products, you will need to check the manual or ask the manufacturer.

Q2: How to charge MS621FE?

To charge the MS621FE battery, utilize a lithium-ion battery charger built exclusively for coin cells. The terminals or contacts on the charger correspond to the MS621FE battery's positive (+) and negative (-) terminals. Place the battery in the charger, make sure the polarity is right, then follow the manufacturer's charging time and process recommendations to guarantee proper charging and use.

Q3: How long can MS621FE be used?

The MS621FE lithium-ion coin cell battery provides approximately 5-6 milliamp hours (mAh) of capacity and should last for a long time with proper use and maintenance.

Q4: What can be used to replace MS621FE?

Generally speaking, it is best to buy original products. If you really can't buy it, you can ask the relevant store if there are alternative models. When you check it yourself, you can find alternatives based on capacity and properties.

Q5: How to disassemble MS621FE?

MS621FE contains some dangerous chemical materials and is not recommended to be disassembled. If the battery needs to be replaced or disposed of, use local recycling or disposal techniques.

Final thoughts

We have provided an overview and categorization of the most commonly used batteries on the market, including the basic battery structure, model categories, and some application recommendations. This material includes the specifications and advantages of different types of batteries, as well as how batteries are used, similar as charging, discharging and the effect of temperature on batteries, to offer druggies professionalknowledge.However, I'll be happy to help, If you have any questions about batteries or other products. To purchase batteries, visit Blikai Mall.

Related Articles

Comparison of CR2016 Battery and CR2025 Battery

LR44 Battery: Everything You Need to Know [2024 Updated]

Lithium cr1620 Battery:Features, Specification and Applications

About Blikai Mall

Blikai Mall (WWW.Blikai.COM) was founded in 2023, based on the principle of "quality parts, customer first, honesty and caring service", our business is mainly focused on the distribution of electronic components. Our group's self-operated services in the electronic industry chain include: online EDA (LCEDA), industry-leading PCB prototyping/small-batch production, component mall, stencil manufacturing, SMT assembly, as well as electronic design education and solutions. Committed to the pursuit of excellence, Blikai Mall focuses on superior quality, efficiency, and rigorous testing procedures at every stage of production. Our goal is to ensure that each product is properly inspected before to shipment to assure flawlessness. We strive to provide our consumers with a positive purchasing and usage experience by delivering faultless products. With the advantage of quality, we are committed to building a comprehensive and smart purchasing platform. Through our trustworthy approach, we endeavour to enliven and advance the trading landscape of the electronics market.