MX25U12832FM2i02 IC Chip: Features, Applications and Datasheet

Alt Text: MX25U12832FM2i02 

Product Overview

Part Number: MX25U12832FM2i02 

Manufacturer: Macronix

Description: NOR flash memory chip with 128 Mbits, Quad I/O, and QPI, 133MHz, 8-SOP

Lead Time: Can Ship Immediately

Datasheet: Datasheet PDF

Category: Integrated Circuits (ICs) Memory 

Number of Pins: 8

Short Description

Macronix manufactures this product. Part number MX25U12832FM2I02 is from the manufacturer. According to HTSUS, it might have a value of 8542.32.0071. RoHS3 compliance is achieved by the product. There are four spi lines, a quad row interface, and a quad row interface to the memory. The write cycle time is 40 seconds, 3 milliseconds. There is an operating temperature range of -40°c to 85°c (ta) for the product. The memory size is typically 128 MB. Additionally, the product is made of eight SOICs (0.208", 5.30mm). The system is also unaffected. As for the memory, the product has an arrangement of 16 m x 8 m. A tube package is used to ship it. Typically, it is rated 3 (168 hours) in moisture sensitivity. An 133 MHz clock frequency is featured in the product.

 

It has a standard lead time of 10 weeks. Surface mount configurations are available for the product. Users prefer mxsmioTM over other products. An 8-sop device package value is provided by the supplier. The memory type is nonvolatile. With a voltage supply of 1.65 volts x 2 volts, it operates optimally. 3a991b1a is the code number for this product. There is no flash technology used in this product. The mx25u12832 is the base product number for this product. This is a type of flash memory.

 

Product Technical Specifications

 

As the memory type of this device, it can be classified as a Non-Volatile-Type Memory. As well as memory ics, tube cases are also available. This single-file memory ICS resides in an 8-SOIC (0.209, 5.30mm width) case. In terms of memory size, the chip has a 128MB 16M x 8 memory. Devices that use mainstream memory formats, such as FLASH, are used in this device.

MX25U12832FM2i02 Features

Macronix International Co., Ltd. manufactures the MX25U12832FM2i02 flash memory chip. In detail, it has the following features:

 

Memory Capacity: Its part number indicates that it has a memory capacity of 128 Megabytes (Mb), which is equivalent to 16 Megabytes (MB). A wide range of applications can benefit from this abundant storage capacity, including embedded systems, consumer electronics, and networking.

 

Serial Peripheral Interface (SPI): For communication with microcontrollers or processors, "MX" series flash memory chips commonly use a Serial Peripheral Interface (SPI). Serial protocol interfaces allow high-speed data transfers between flash memory and host devices via SPI, which is a common protocol for serial communication.

 

Low Power Consumption: Battery-powered or energy-efficient devices can benefit from the MX25U12832FM2i02's low power consumption. The operation of embedded systems and portable devices at low power helps extend battery life and reduce power consumption overall.

 

Read and Write Speeds: With this flash memory chip, you can access your stored data quickly, thanks to the fast read and write operations. For boot code execution, firmware storage, and real-time processing, high-speed data transfers are particularly important.

 

Wide Voltage Range: Various system designs and power supply configurations can be supported by the MX25U12832FM2i02 due to its wide voltage range. It provides flexibility in system integration since it ensures reliable operation over a wide range of voltage levels.

 

Advanced Security Features: Advanced security features are often incorporated into Macronix flash memory chips to prevent unauthorized access, tampering, and cloning. In order to enhance data integrity and system security, hardware-based encryption as well as secure boot mechanisms can be used.

 

High Reliability and Endurance: As a result of their high reliability and endurance, flash memory devices can withstand many cycles of reading, writing, and erasing. Designed for rigorous reliability standards, the MX25U12832FM2i02 can withstand harsh environments and long-term data retention.

 

Compact Form Factor: Surface-mount packages, such as the MX25U12832FM2i02, are ideal for space-constrained or board-limited designs. Embedded systems and electronic devices can easily integrate with its small form factor.

 

A wide range of applications in electronic devices use MX25U12832FM2i02 flash memory chips because these chips have a large capacity, low power consumption, high reliability, high performance, and security features. A secure, efficient, and reliable storage solution can be developed with its features by embedded system designers, hardware engineers, and developers.

Applications of MX25U12832FM2i02 IC Chip

Manufactured by Macronix International Co., Ltd., MX25U12832FM2i02 is an industry-specific flash memory chip with a wide range of applications. The following are some of its applications in detail:

 

Automotive Infotainment Systems: It stores navigation maps, multimedia content, firmware updates, and configuration data for automotive infotainment systems. In-vehicle entertainment and navigation are ideal for it since it is reliable, easy to use, and compatible with OEM interfaces.

 

Smart Grids: 

Data on energy consumption, meter readings, and system configurations are stored in smart grid systems using the MX25U12832FM2i02. Remote monitoring and deployment in outdoor environments are made possible by its low power consumption and wide operating temperature range.

 

Medical Imaging Equipment: A patient's MRI image, diagnostic report, and software update can be stored in the MX25U12832FM2i02 in medical imaging equipment. This database is highly reliable, data-integrity, and medical standard-compliant, ensuring that sensitive medical data is stored in a safe, accurate, and secure manner.

 

Telecom Base Stations: A MX25U12832FM2i02 is the standard storage device for telecom base stations that store firmware images, configuration files, and call logs. This device is capable of high-speed read/write operations and is compatible with a wide range of telecommunication protocols.

 

Industrial Robotics: MX25U12832FM2i02s are used to store motion trajectory data, control programs, and sensor data on industrial robots. A robotic system requiring precision and efficiency is assured by its high endurance and fast data access speeds.

 

Agricultural Monitoring Systems: Crop management algorithms and sensor data are stored in it by agricultural monitoring systems. Remote agricultural environments and field monitoring applications are made possible by its low power consumption and rugged design.

 

Asset Tracking Devices: A location data, asset identifier, and tracking algorithm can be stored on the MX25U12832FM2i02 by asset tracking devices. Logistics, transportation, and supply chain management can use it for real-time monitoring and tracking assets that are small, require low power consumption, and are highly reliable.

 

Environmental Monitoring Stations: For storing weather forecasts, sensor readings, pollution data, and pollution measurements, environmental monitoring stations use the MX25U12832FM2i02. Remote monitoring and harsh environmental conditions are made possible by its wide operating temperature range and data retention capabilities.

 

Satellite Communication Systems: It is used to store telemetry data, commands, and algorithms for satellite tracking in satellite communication systems. Satellite payloads and ground control systems in space missions are continuously operated due to its radiation tolerance and high reliability.

 

Smart Energy Meters: Data that is collected from smart meters, tariff schedules, and metering algorithms are stored on the MX25U12832FM2i02. In residential and commercial buildings, it enables accurate billing and management of electricity usage due to its low power consumption and secure storage capabilities.

 

POS (Point of Sale) Systems: For storing inventory databases, transaction logs, and sales reports, POCs use the MX25U12832FM2i02. POS software applications can be integrated seamlessly with this system for efficient data access and inventory management.

 

Surveillance and security systems: Video is saved, access control is tracked, and privacy policies are maintained using this MX25U12832FM2i02. Monitoring continuous assets is possible with enhanced reliability and data integrity.

 

Railway Signaling Systems: It is used to store train schedules, track occupancy data, and control logic for railway signaling systems. Railway signaling infrastructure is safe and reliable because of its rugged design and compliance with railway standards.

 

Oil and Gas Exploration: Geophysical surveys, seismic data, drilling parameters, and drilling parameters are all stored on the MX25U12832FM2i02. Remote drilling sites and offshore platforms can benefit from its high endurance and compatibility with ruggedized equipment.

 

Flight Data Recorders (Black Boxes): Various aircraft systems data and flight parameters are recorded in flight data recorders with the MX25U12832FM2i02. Providing accurate reconstruction of aircraft incidents and accidents for safety investigations is made possible by its high reliability, data integrity, and compliance with aviation standards.

Faqs

Question 1: What is the expected lifespan of the MX25U12832FM2i02 chip?

Answer: There is a high endurance rating on the MX25U12832FM2i02 chip, which ensures reliable long-term storage and retention of data over the course of its lifetime after multiple cycles of memory read, write, and erase.

 

Question 2: Is there a place where I can purchase MX25U12832FM2i02 IC chips?

Answer: Electronic component suppliers, authorized distributors, and online marketplaces sell the MX25U12832FM2i02 chip. If you would like to purchase Macronix International Co., Ltd. products, then you can check on BLIKAI Electronics too.

Final Verdict

MX25U12832FM2i02 is a versatile and reliable storage chip available from Macronix International Co., Ltd. A variety of industries, including automotive, healthcare, telecommunications, industrial automation, and consumer electronics, require a chip that is reliable, power efficient, fast data access, and secure. Designed to handle harsh conditions, it offers a wide operating temperature range.

 

The MX25U12832FM2i02 chip ensures seamless operation and reliable data storage, whether it stores firmware, data, configuration settings, or multimedia content. In addition to its high endurance, this device is capable of being adapted to a wide range of microcontrollers and processors. With MX25U12832FM2i02, you can now create innovative devices across a wide range of industries to meet the evolving needs of modern electronics.