W25Q80DVSNIG Review: Features, Applications and Datasheet

W25Q80DVSNIG

Product Overview

Part Number: W25Q80DVSNIG

Manufacturer: Winbond Electronics

Description: IC FLASH 8MBIT 104MHZ 8SOIC

Lead Time: Can Ship Immediately

Datasheet: Datasheet PDF

Category: Integrated Circuits (ICs), Memory

Cell Type: NOR

Description

SpiFlash® Memory ICs 3/3.3V V 4.9mm mm series. In addition to the W25Q80DVSNIG, Winbond produces the W25Q80DVSNIG, a serial flash memory device with 8 pins. Datasheet, features, and applications will be presented in this article.

With its small footprint, few pins, and high power requirements, the W25Q80DV (8M-bit) Serial Flash Memory offers a good option for systems who have limited space, pins, and power. The 25Q series of Serial Flash devices offers superior performance as well as greater flexibility than any standard Serial Flash device. The SPXIP units can store voice, text, data, and can also shadow code to RAM or be directly connected to a dual or quad SPXIP to execute code directly from a dual or quad SPXIP controller to store data, text, and voice. As little as 1 yA of current can be drawn from the device when the device is powered down by a single 2.7V to 3.6V power source. There are bundles of devices that can save you space and allow you to purchase all the devices at once.

This W25Q80DV array has a total of 4,096 programmable pages, each of which contains 256 bytes. The amount of bytes that can be programmed at one time is up to 256. The chip can be erased in 16-bytes sectors (4KB), in 256-bytes blocks (64KB), in 12832KB blocks (64KB), or it can be erased by the chip as a whole (chip erase). On the W25Q80DV, there are 16 blocks that are erasable, and there are 256 sectors that are erasable. It is possible to increase the flexibility of programs in which data, parameters, and other parameters need to be stored due to the compact 4KB sectors in the memory.

Additionally to the usual Serial Peripheral Interface (SPl), the W25Q80DV offers an excellent Dual/Quad output and Serial Data 1/00 (DI), 1/02 (WP), and 1/03 (/HOLD). SPI clock frequencies of up to 104MHz are supported by the Fast Read Dual/Quad 1/0 instructions, so the Dual 2/0 instruction can be executed at 208MHz and the Quad 1/0 instruction at 416MHz, respectively. The transfer speeds of these flash memories are faster than those of traditional parallel 8 and 16-bit flash memory. Besides the hold pins, write protection pins, and programmed write protection features, this device also features a top or bottom array control, or full complement array control to provide additional control flexibility. Moreover, the device is also supported by a 64-bit Unique Serial Number that can be used to identify the device and manufacturer in accordance with JEDEC standards.

W25Q80DVSNIG Design

W25Q80DVSNIG Pinout

W25Q80DVSNIG CAD Model

W25Q80DVSNIG Footprint

Product Specifications

It is the responsibility of the respective owners of all trademarks, brands, and logos that appear on this site. The depiction, description, or sale of products featuring any of these brands, trademarks, or logos is not intended to imply affiliation or authorization.

ECCN (US)	EAR99
Part Status	Active
Automotive	No
PPAP	No
Cell Type	NOR
Chip Density (bit)	8M
Architecture	Sectored
Boot Block	Yes
Block Organization	Symmetrical
Address Bus Width (bit)	24
Sector Size	4Kbyte x 256
Page Size	256byte
Number of Bits/Word (bit)	8
Number of Words	1M
Programmability	Yes
Timing Type	Synchronous
Max. Access Time (ns)	6
Maximum Erase Time (S)	6/Chip
Maximum Programming Time (ms)	3/Page
Interface Type	Serial (SPI, Dual SPI, Quad SPI)
Minimum Operating Supply Voltage (V)	2.7
Maximum Operating Frequency (MHz)	104
Typical Operating Supply Voltage (V)	3\|3.3
Maximum Operating Supply Voltage (V)	3.6
Programming Voltage (V)	2.7 to 3.6
Operating Current (mA)	25
Program Current (mA)	25
Minimum Operating Temperature (°C)	-40
Maximum Operating Temperature (°C)	85
Supplier Temperature Grade	Industrial
Command Compatible	Yes
ECC Support	No
Support of Page Mode	No
Minimum Endurance (Cycles)	100000
Packaging	Tube
Mounting	Surface Mount
Package Height	1.45
Package Width	3.9
Package Length	4.85
PCB changed	8
Standard Package Name	SO
Supplier Package	SOIC N
Pin Count	8
Lead Shape	Gull-wing

Serial and 1.2V NOR Flash is included in Winbond's NOR Product Portfolio, which is suitable both for consumer and industrial applications. Parallel NOR Flash products of the GL standard range in capacity from 32 Mb to 512 Mb. With SPI interface, Winbond's SpiFlash® Multi-I/O Memories W25X and W25Q allow you to store multiple I/Os simultaneously. As a result of high performance and small erasable sectors, W25X and W25Q offer densities ranging from 512k to 512M.

Features

W25Q80DVSNIG from Winbond is an IC (Integrated Circuit) that implements flash memory. The W25Q series of hard drives is widely used in electronic devices to store data. The W25Q80DVSNIG has the following detailed features:

Low Power Consumption:

In addition to being energy-efficient and battery-powered, the flash memory has been designed to consume little power.

Operations related to erasing and programming:

In addition to performing sector and bulk erase operations, the W25Q80DVSNIG can also program pages and bytes. Data management is made easier with this flexibility.

Memory Capacity:

A total of 8 megabytes of memory is available on the W25Q80DVSNIG. Each of these pages contains 256 bytes, making a total capacity of 1,024 bytes.

SPI Flash Interface:

In addition to microcontrollers and other digital devices, SPI serves as a communication interface.

Wide Voltage Range:

There is a wide range of voltages that the device can operate at, typically ranging from 2.7V to 3.6V. The device can operate at various voltages to enhance compatibility with various systems.

High-Speed Performance:

Fast data transfer rates are possible with the W25Q80DVSNIG thanks to its support for high-speed clock frequencies. In the datasheet, you can find the specific clock frequencies supported.

Quad-SPI Mode:

Compared to traditional Serial Peripheral Interface (SPI), this flash memory supports Quad Serial Peripheral Interface (Quad-SPI).

Uniform 4KB Sectors:

A kilobyte (KB) of data is contained in each sector of the memory. Information can be stored and retrieved efficiently using this sector architecture.

Suspend/resume programmable erase:

Programmatic erase suspend/resume is supported on the W25Q80DVSNIG for interrupting erase operations and resuming them later.

Security Features:

There is a unique 64-bit Serial Number included as part of the security features, which can be used to identify or secure the device.

Wide Temperature Range:

This device is suitable for applications in a variety of environments due to its wide temperature range.

Deep Power-Down Mode:

Power consumption is further reduced when the device is unplugged, thanks to a deep power-down mode.

RoHS Compliant:

RoHS compliance is ensured by the W25Q80DVSNIG, which complies with environmental guidelines.

Package Options:

With different package options available, flash memory can be easily integrated into a variety of electronic devices.

High Reliability:

An advanced wear-leveling algorithm, for example, can contribute to memory longevity and durability.

Applications of W25Q80DVSNIG

Automotive Systems:

Automotive electronics rely heavily on flash memory. A W25Q80DVSNIG is typically used to store firmware data and data in engine control units (ECUs).

Smart Grids and Energy Management:

The firmware updates, metering data, and configuration settings are stored in flash memory in smart meters and energy management systems. In these applications, reliability is of the utmost importance for the W25Q80DVSNIG.

IoT (Internet of Things) Devices:

Firmware and configuration data for IoT devices are frequently stored in non-volatile memory. Sensors, smart home appliances, and other IoT devices can integrate the W25Q80DVSNIG.

Wearable Devices:

Fitbits and smartwatches, among other wearable electronics, can store firmware, user data, and settings on the W25Q80DVSNIG.

Communication Systems:

The W25Q80DVSNIG may be used to store firmware and configuration files for communication equipment, such as radios and transceivers.

Data Logging Systems:

Recorded information is stored on flash memory by data loggers, weather stations, and environmental monitoring devices. It is beneficial to use the W25Q80DVSNIG in such applications due to its large storage capacity.

Security Systems:

Access control data, event logs, and firmware are all stored in flash memory in security systems. In these applications, the security features of the W25Q80DVSNIG can prove valuable.

Embedded Systems:

Firmware, configuration settings, and other critical data are often stored on the W25Q80DVSNIG in embedded systems. Microcontrollers and other embedded processors can easily interface with it through its SPI interface.

Similar Specs Components

Part Number	W25Q80DVSNIG	MX25L8006EM1I-12G	MX25L8006EM2I-12G	MX25L1606EM1I-12G	MX25L512EMI-10G
Manufacturer	Winbond Electronics	Macronix	Macronix	Macronix	Macronix
Package / Case	8-SOIC (0.154, 3.90mm Width)	8-SOIC (0.154, 3.90mm Width)	8-SOIC (0.209, 5.30mm Width)	8-SOIC (0.154, 3.90mm Width)	SOIC
Power Supplies	3/3.3 V	3/3.3 V	3/3.3 V	3/3.3 V	3/3.3 V
Terminal Pitch	1.27 mm	1.27 mm	1.27 mm	1.27 mm	1.27 mm
Operating Mode	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS
Supply Voltage-Min (Vsup)	2.7 V	2.7 V	2.7 V	2.7 V	2.7 V
Terminal Position	DUAL	DUAL	DUAL	DUAL	DUAL
JESD-30 Code	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8
Number of Terminations	8	8	8	8	8

Final Verdict

The W25Q80DVSNIG is a versatile and reliable flash memory IC, providing a non-volatile storage solution for a variety of applications. The memory device has a capacity of 8 megabits (1 megabyte), a wide voltage range, and quick SPI communication.

It provides secure and efficient storage for firmware, configuration settings, and critical data, whether embedded in consumer electronics, automotive applications, industrial control systems, or Internet of Things devices. With low power consumption and programmable erase and suspend/resume features, the device is easy to use.