Name: BG77USBR10 RF TXRX MOD CELL/NAV CARD EDGE
Brand: 5G HUB
SKU: BG77USBR10
Price: 55.2 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Frequency

Accepted Answer

Frequency is the number of occurrences of a repeating event per unit of time, with the base unit of Hertz (Hz).

Question 5

What is the Memory Size

Accepted Answer

The total data storage capacity of a semiconductor memory device, measured in bits, bytes, or their multiples (e.g., KB, MB, GB). It defines the maximum amount of program code or data the device can hold, directly determining its application scope in syst

Question 6

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 7

What is the Modulation

Accepted Answer

A technique for encoding information onto a carrier signal by systematically varying one or more of its properties—amplitude, frequency, or phase. This process enables the efficient transmission of data over long distances via wired or wireless channels,

Question 8

What is the RF Family/Standard

Accepted Answer

This term categorizes a wireless communication device or module based on the specific radio frequency protocol, air interface, and network architecture it implements. It defines the fundamental operating rules for spectrum access, modulation, data framing

Question 9

What is the Serial Interfaces

Accepted Answer

These are dedicated hardware or software-defined communication channels that enable sequential, bit-by-bit data transfer between a host device (e.g., microcontroller) and peripherals. Common standards include UART (asynchronous), SPI (synchronous, full-du

Question 10

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 11

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 12

What is the DigiKey Programmable

Accepted Answer

A service offering that allows customers to configure specific parameters of a component (e.g., memory size, clock frequency, or firmware) at the point of order. This enables the manufacturer to produce a custom variant from a base product, providing appl

Question 13

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 14

What is the Power - Output

Accepted Answer

This parameter specifies the maximum continuous electrical power a device can deliver to its load under nominal operating conditions, measured in Watts (W). It is a key performance rating for power supplies, amplifiers, transmitters, and motor drivers, de

Question 15

What is the Data Rate

Accepted Answer

It specifies the maximum speed at which a digital communication channel, interface, or device can reliably transfer data, typically measured in bits per second (bps) or its multiples (kbps, Mbps, Gbps). This parameter fundamentally defines the bandwidth c

Question 16

What is the Sensitivity

Accepted Answer

Sensitivity quantifies the magnitude of a device's output signal change in response to a given change in the measured input quantity. It is a key transfer function parameter, typically expressed in units like mV/V for sensors, µV/Pa for microphones, or V/

Question 17

What is the Protocol

Accepted Answer

A set of formal rules and conventions governing the format, timing, sequencing, and error control of data exchange between two or more devices or systems. It defines the syntax, semantics, and synchronization of communication, ensuring interoperability re

Question 18

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 19

What is the Current - Receiving

Accepted Answer

The maximum continuous current that a device's input port or power pin is designed to safely accept from an external source to ensure proper operation. This rating, measured in Amperes (A), defines the upper limit of the device's power consumption under n

Question 20

What is the Current - Transmitting

Accepted Answer

This parameter specifies the maximum continuous current that a component, such as a connector, cable, or PCB trace, is designed to carry from a source to a load without exceeding its thermal or electrical limits. It is a critical rating for ensuring relia

Question 21

What is the Antenna Type

Accepted Answer

This term categorizes the radiating element based on its fundamental design, operating principle, and radiation pattern. Key types include monopole, dipole, patch, helical, and Yagi-Uda. The selection dictates performance parameters such as impedance, ban

Question 22

What is the Utilized IC / Part

Accepted Answer

This parameter specifies the specific integrated circuit or discrete component that is physically mounted and electrically active within a module or assembled product. It identifies the core semiconductor or passive element that performs the primary funct

5G HUB BG77USBR10

TR-900-MC

X09-009NSC-TX

X09-019NSC

XC09-038WNC

X24-019NSC

XT09-SI

ZMN2400HP

XBP24-AWI-001

FS-382

DC-WME-01T-S-50