Name: HP-CWS-F05X35-100-N COPPER-WATER HEAT PIPE, FLAT, LE
Brand: Aavid, Thermal Division of Boyd Corporation
SKU: HP-CWS-F05X35-100-N
Price: 5.336 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Thermal Resistance

Accepted Answer

A measure of a material or component's opposition to heat flow, quantifying the temperature rise per unit of power dissipated. It is a key parameter for thermal management, defining the temperature difference (in °C or K) between two points (e.g., junctio

Question 6

What is the Platform

Accepted Answer

A standardized hardware and software architecture that provides a foundational set of services, interfaces, and development tools for building and deploying electronic systems or products. It defines the core computational resources, operating environment

Question 7

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 8

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Wick Type

Accepted Answer

This parameter specifies the physical form of the capillary structure used to transport liquid from a reservoir to the evaporation zone in a heat pipe or vapor chamber. Common types include sintered powder, grooved, and mesh wicks. The wick's geometry and

Question 11

What is the Working Fluid

Accepted Answer

A substance, typically a liquid or gas, that serves as the primary medium for transferring energy (heat or mechanical work) within a thermodynamic system or device. Its selection is based on properties like specific heat capacity, thermal conductivity, vi

Question 12

What is the Minimum Bend Radius

Accepted Answer

The smallest radius to which a cable, wire, or flexible conduit can be bent without causing permanent deformation, damaging internal conductors, or compromising electrical performance. This critical mechanical specification, measured in millimeters or as

Question 13

What is the Power - Cooling

Accepted Answer

It specifies the maximum steady-state thermal power, measured in watts (W), that a cooling system (e.g., heat sink, fan, or liquid cold plate) can continuously dissipate from a heat source to the ambient environment under defined operating conditions. Thi

Question 14

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 15

What is the Height

Accepted Answer

Height refers to the vertical dimension of a component, measured perpendicularly from its mounting or reference plane to its highest point. This critical mechanical parameter determines the component's spatial footprint and influences clearance, stacking

Question 16

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 17

What is the Attachment Method

Accepted Answer

The specific mechanical means by which a component or assembly is physically secured to a substrate, chassis, or another part. This includes techniques such as adhesive bonding, screw fastening, snap-fitting, press-fitting, or welding. The chosen method i

Question 18

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Question 19

What is the Diameter

Accepted Answer

A fundamental linear dimension specifying the width of a circular or cylindrical object, such as a wire, connector, shaft, or lens. It is a critical geometric parameter that determines mechanical fit, current-carrying capacity, optical properties, and spa

Question 20

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 21

What is the Shape

Accepted Answer

The physical form or outline of a component's package, which dictates its mechanical fit, mounting compatibility, and spatial footprint on a PCB. It is a primary identifier (e.g., cylindrical, rectangular, radial, axial) that determines handling, assembly

Aavid, Thermal Division of Boyd Corporation HP-CWS-F05X35-100-N

ATS-HP-D4L200G30W-001

ATS-HP-D6L200G45W-005

ATS-HP-D6L200S45W-009

ATS-HP-F9L150S70W-013

ATS-HP-F7L150S65W-017

ATS-HP-F6L150S60W-021

ATS-HP-F5L150S40W-025

ATS-HP-F6L150S30W-029

ATS-HP-F5L200S25W-033

110578_REV1