Name: ADN2841ACPZ-32-RL IC LASER DRVR 2.7GB 5.5V 32LFCSP
Brand: Analog Devices Inc.
SKU: ADN2841ACPZ-32-RL
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 6

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 7

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Number of Channels

Accepted Answer

This parameter specifies the total count of independent, parallel signal paths or data streams that a component (e.g., an amplifier, ADC, DAC, multiplexer, or communication IC) can process or handle simultaneously. It is a fundamental capacity metric that

Question 10

What is the Current - Supply

Accepted Answer

This parameter specifies the continuous direct current drawn by a device from its power supply pin(s) to maintain normal operation under specified conditions. It is a key specification for power budget calculation, thermal design, and selecting appropriat

Question 11

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 12

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 13

What is the Data Rate

Accepted Answer

It specifies the maximum speed at which a digital communication channel, interface, or device can reliably transfer data, typically measured in bits per second (bps) or its multiples (kbps, Mbps, Gbps). This parameter fundamentally defines the bandwidth c

Question 14

What is the Current - Modulation

Accepted Answer

Current - Modulation refers to the amplitude of the high-frequency alternating current used to drive the light-emitting element (typically a laser diode) in an optical transmitter. This current directly controls the intensity of the emitted optical signal

Question 15

What is the Current - Bias

Accepted Answer

The quiescent DC current required to power the internal circuitry of an active device (e.g., op-amp, sensor, RF module) to establish its operating point without any applied signal. Measured in Amperes (A) or milliamperes (mA), it is a key parameter for ca

Question 16

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Analog Devices Inc. ADN2841ACPZ-32-RL

X9520V20I-B

X9522V20I-B

MAX3668EHJ

AD9660KR-REEL

ADN2841ACP-32

AD9662ARQZ-REEL7

MAX3869EHJ+

MAX3656ETG+

ONET4291VARGP

LTC5100EUF#TRPBF