Name: HMC8038LP4CETR IC RF SWITCH SPDT 6GHZ 16LFCSP
Brand: Analog Devices Inc.
SKU: HMC8038LP4CETR
Price: 8.168 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 7

What is the Topology

Accepted Answer

Topology refers to the pattern of physical or logical connections and arrangements among the components (e.g., components, nodes, devices) within a system. It defines the flow paths for signals, data, or power and forms the skeletal framework of the syste

Question 8

What is the P1dB

Accepted Answer

P1dB (1-dB Compression Point) is the output power level at which the power transfer characteristic of an RF active device (e.g., amplifier, mixer) begins to显著 deviate from linearity, causing the actual output power to be 1 decibel (dB) lower than the expe

Question 9

What is the Test Frequency

Accepted Answer

Test Frequency refers to the specific center frequency of the input signal applied or at which a measurement is performed during the testing, measurement, or calibration of an electronic component, circuit, or system.

Question 10

What is the Isolation

Accepted Answer

Isolation refers to the establishment of a high-impedance barrier between two or more circuits within an electrical system, designed to prevent the direct flow of DC and hazardous AC currents, while allowing signals or power to cross in a controlled manne

Question 11

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 12

What is the Circuit

Accepted Answer

A circuit is a closed path formed by interconnected electrical components and conductors, used to transmit current, process signals, or distribute electrical energy.

Question 13

What is the IIP3

Accepted Answer

IIP3 (Input Third-Order Intercept Point) is a theoretical power level, measured in dBm, where the extrapolated fundamental and third-order intermodulation distortion (IMD3) tones from a nonlinear device (e.g., amplifier, mixer) would have equal amplitude.

Question 14

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 15

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 16

What is the RF Type

Accepted Answer

This parameter classifies a radio frequency component or subsystem based on its core function within an RF signal chain. It defines the fundamental operation, such as amplification (LNA, PA), frequency conversion (mixer), oscillation (VCO), signal distrib

Question 17

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 18

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 19

What is the Insertion Loss

Accepted Answer

Insertion Loss quantifies the reduction in signal power that occurs when a component (e.g., connector, cable, filter) is inserted into a transmission line, measured in decibels (dB). It is a fundamental performance metric for passive RF/microwave and high

Question 20

What is the Frequency Range

Accepted Answer

The span of electromagnetic frequencies over which a component, device, or system is designed to operate effectively, typically specified by its lower and upper limits in Hertz (Hz). This parameter defines the usable bandwidth for signal transmission, rec

Question 21

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 22

What is the Impedance

Accepted Answer

Impedance is the total opposition a circuit presents to alternating current, measured in Ohms (Ω). It is a complex quantity combining resistance (real part) and reactance (imaginary part) from capacitance and inductance. This parameter is fundamental for

Question 23

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Analog Devices Inc. HMC8038LP4CETR

ADG918BRM

ADG919BRM-REEL7

ARD10012Q

ARD12012

ARD1204H

ARD15124

ARD50024

ARD52024

ARD55124

NJG1512V-TE1