Name: A-IE-E-DIP CONN RCPT IEEE 1394 FIREWIRE RA
Brand: Assmann WSW Components
SKU: A-IE-E-DIP
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Mounting Feature

Accepted Answer

Mounting Feature refers to the physical design characteristics on an electronic component or enclosure that enable it to be mechanically attached to a circuit board, panel, or chassis, such as holes, tabs, flanges, or adhesive pads.

Question 5

What is the Mating Cycles

Accepted Answer

The specified number of times a separable electrical connector can be successfully mated (connected) and unmated (disconnected) while maintaining its electrical and mechanical performance within datasheet specifications. This rating is a key reliability m

Question 6

What is the Voltage - Rated

Accepted Answer

Voltage - Rated refers to the operating voltage that a device, component, or insulation material is designed to withstand continuously.

Question 7

What is the Insulation Color

Accepted Answer

The visible hue of the insulating material on a wire, cable, or component body, determined by added pigments. It serves as a primary visual identifier for circuit tracing, polarity designation (e.g., red for positive), functional grouping (e.g., signal vs

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Shell/Shielding Material

Accepted Answer

This specification defines the substance used to construct the conductive layer that provides electromagnetic interference (EMI) and radio frequency interference (RFI) protection for a cable or connector. Its primary function is to reflect or absorb unwan

Question 10

What is the Number of Ports

Accepted Answer

This parameter specifies the total count of independent physical or logical interfaces on a networking or communication device (e.g., switch, router, hub) for connecting external cables or links. It defines the device's fundamental connection capacity and

Question 11

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 12

What is the Number of Contacts

Accepted Answer

This parameter specifies the total quantity of individual conductive elements within a connector, switch, relay, or socket that are designed to establish a discrete electrical path when mated. It is a fundamental capacity specification that directly deter

Question 13

What is the Connector Type

Accepted Answer

A standardized classification for electrical interfaces based on their mechanical form, mating mechanism, and electrical characteristics. It defines the physical and electrical compatibility between mated pairs, ensuring reliable signal and power transmis

Question 14

What is the Gender

Accepted Answer

The physical configuration of a connector's mating interface, specifying whether it presents pins (male) or sockets (female). This fundamental mechanical attribute ensures correct and secure mating between complementary pairs, preventing incorrect connect

Question 15

What is the Contact Finish

Accepted Answer

A conductive surface treatment applied to the electrical contact areas of connectors, switches, or relay terminals. Its primary functions are to protect the base metal from oxidation and corrosion, reduce contact resistance, and enhance solderability and

Question 16

What is the Specifications

Accepted Answer

Specifications refer to the complete set of measurable electrical, mechanical, and environmental parameters that define a component's performance, limits, and physical characteristics. They are documented in datasheets and serve as the objective basis for

Question 17

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 18

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 19

What is the Current Rating (Amps)

Accepted Answer

Specifies the maximum continuous current a conductor, connector, or component can safely carry without exceeding its thermal limits, thereby preventing overheating and ensuring long-term reliability. This ampere (A) rating is a fundamental parameter for s

Question 20

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 21

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 22

What is the Shielding

Accepted Answer

A conductive layer, typically metallic braid or foil, applied around a cable's internal conductors or over a component's housing. Its primary function is to attenuate electromagnetic interference (EMI) by reflecting or absorbing external fields and contai

Question 23

What is the Material Flammability Rating

Accepted Answer

A flammability classification for the insulating or housing material of a component, indicating its resistance to ignition and flame propagation when exposed to a standardized ignition source. Common rating systems include UL 94 (e.g., V-0, V-1, HB) and I

Assmann WSW Components A-IE-E-DIP

0534600611

AU-Y1007

787617-1

896-30-004-00-000000

787745-1

A-USBPB

921

925

929

A-USBSA