Name: AM1064-2 IC RF AMP GPS 0HZ-8GHZ 6DFN
Brand: Atlanta Micro Inc.
SKU: AM1064-2
Price: 22.848 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Noise Figure

Accepted Answer

“Noise Figure” is a dimensionless ratio, typically expressed in decibels (dB), that quantifies the degradation of the signal-to-noise ratio caused by an active device (e.g., amplifier, mixer) or system at its output. It is fundamentally defined as NF = 10

Question 7

What is the P1dB

Accepted Answer

P1dB (1-dB Compression Point) is the output power level at which the power transfer characteristic of an RF active device (e.g., amplifier, mixer) begins to显著 deviate from linearity, causing the actual output power to be 1 decibel (dB) lower than the expe

Question 8

What is the Test Frequency

Accepted Answer

Test Frequency refers to the specific center frequency of the input signal applied or at which a measurement is performed during the testing, measurement, or calibration of an electronic component, circuit, or system.

Question 9

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 10

What is the Frequency

Accepted Answer

Frequency is the number of occurrences of a repeating event per unit of time, with the base unit of Hertz (Hz).

Question 11

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 12

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 13

What is the RF Type

Accepted Answer

This parameter classifies a radio frequency component or subsystem based on its core function within an RF signal chain. It defines the fundamental operation, such as amplification (LNA, PA), frequency conversion (mixer), oscillation (VCO), signal distrib

Question 14

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 15

What is the Gain

Accepted Answer

Gain quantifies the amplification factor of a signal's power, voltage, or current as it passes through an active component or circuit. It is a dimensionless ratio, often expressed logarithmically in decibels (dB). This parameter is fundamental for designi

Question 16

What is the Current - Supply

Accepted Answer

Slew Rate is the maximum rate of change of the amplifier's output voltage, typically measured in volts per microsecond (V/µs). It limits how fast the output can respond to a large, fast-changing input signal and is critical for large-signal and high-frequ

Question 17

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Atlanta Micro Inc. AM1064-2

UPC1678GV-E1

UPC2746TB-E3

UPC2792TB-E3

BBA-322-A

LMX2216MX

MAX2630EUS-T

T0905-TSPH

THS9001DBVT

AD605AR

AD8353ACP-R2