Name: 60248 B302, 7.0X3.0", RED/YEL, GAS,25/
Brand: Brady Corporation
SKU: 60248
Price: 46.96 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 5

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 6

What is the Color - Background

Accepted Answer

This parameter specifies the visual hue of the non-active or inactive area of a display module, such as the bezel or the space between segments. It is a key aesthetic and ergonomic attribute that influences contrast, readability, and integration into a pr

Question 7

What is the Diameter - Label

Accepted Answer

This dimension specifies the outer diameter of the adhesive identification label or marker affixed to a cable, wire, or component. It defines the physical coverage area for printed information such as part numbers, ratings, or circuit identifiers, ensurin

Question 8

What is the Location

Accepted Answer

Specifies the physical mounting position or designated area on a PCB, chassis, or within a system where a component is to be installed. This parameter is critical for mechanical integration, thermal management, signal integrity (e.g., proximity to noise s

Question 9

What is the Language

Accepted Answer

A standardized system of symbols, syntax, and semantics used to define the behavior and configuration of programmable hardware (e.g., HDLs like VHDL, Verilog) or to create software for embedded processors (e.g., C, C++, Assembly). It serves as the primary

Question 10

What is the Application Specifics

Accepted Answer

These are the detailed operational conditions, environmental constraints, and performance requirements that define how a component is intended to be used within a particular system. This includes parameters such as operating temperature range, input signa

Question 11

What is the Arrangement

Accepted Answer

Arrangement refers to the specific spatial configuration and order of multiple components, terminals, or contacts within a single device or assembly. It defines the physical layout pattern (e.g., linear, circular, matrix) and the positional relationship b

Question 12

What is the Legend (Text)

Accepted Answer

This refers to the descriptive text, symbols, or alphanumeric codes printed or engraved on a component's body or housing. Its primary function is to provide immediate visual identification of key parameters such as part number, value, polarity, manufactur

Question 13

What is the Legend (Symbol Only)

Accepted Answer

A graphical representation printed on a printed circuit board (PCB) that identifies component locations, reference designators, and key test points without using text. It serves as a permanent, at-a-glance assembly and debugging guide, directly aiding in

Question 14

What is the Color - Legend

Accepted Answer

This parameter defines the color of the markings, symbols, or text printed on a component's body for identification. It provides visual contrast against the housing color to ensure critical information like values, ratings, and polarity are legible for as

Question 15

What is the Outside Pipe Diameter (Min)

Accepted Answer

The minimum permissible external diameter of a pipe or conduit, typically measured in millimeters (mm) or inches (in). This dimension is a critical mechanical specification that defines the smallest allowable outer cross-section, ensuring compatibility wi

Question 16

What is the Outside Pipe Diameter (Max)

Accepted Answer

This parameter specifies the maximum allowable outer diameter of a pipe or conduit that can be securely accommodated by a component, such as a cable gland, strain relief, or mounting clamp. It defines the upper size limit for the mating hardware, ensuring

Question 17

What is the Print Type

Accepted Answer

This parameter specifies the method used to apply markings, such as component values, part numbers, or polarity indicators, onto the body of an electronic component. Common methods include ink printing, laser marking, and pad printing. The chosen techniqu

Question 18

What is the Material - Body

Accepted Answer

This specification defines the primary substance from which the main structural housing or enclosure of a component is fabricated. It determines key mechanical properties such as strength, weight, thermal conductivity, and environmental resistance (e.g.,

Question 19

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 20

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 21

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 22

What is the Ratings

Accepted Answer

Ratings specify the absolute maximum and recommended operating limits for electrical, thermal, and environmental conditions, such as voltage, current, power, and temperature. These parameters define the safe operational boundaries and long-term reliabilit

Question 23

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 24

What is the Shape

Accepted Answer

The physical form or outline of a component's package, which dictates its mechanical fit, mounting compatibility, and spatial footprint on a PCB. It is a primary identifier (e.g., cylindrical, rectangular, radial, axial) that determines handling, assembly

Brady Corporation 60248

58

06727

PLD-38

PLD-57

PLD-71

WL35

47500

47507

ALABEL5/8X2

ROHSLABEL