Name: 80910002 MOTOR DC LINEAR R=12.9.OHM POSIT
Brand: Crouzet
SKU: 80910002
Price: 67.112 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Gear Reduction Ratio

Accepted Answer

This parameter defines the ratio of input rotational speed to output rotational speed in a gear train or gearmotor. It quantifies the mechanical advantage, where a ratio greater than 1:1 indicates a reduction in output speed and a proportional increase in

Question 5

What is the Voltage - Rated

Accepted Answer

Voltage - Rated refers to the operating voltage that a device, component, or insulation material is designed to withstand continuously.

Question 6

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 7

What is the Motor Type

Accepted Answer

This parameter categorizes an electric motor based on its fundamental operating principle and construction. It defines the core mechanism for converting electrical energy into mechanical rotation, such as DC brushed, brushless DC (BLDC), stepper, AC induc

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Speed

Accepted Answer

Speed quantifies the rate of change of position over time, typically measured in units like meters per second (m/s) or revolutions per minute (RPM). In engineering, it is a critical performance parameter for rotating or moving components such as motors, f

Question 10

What is the Accuracy

Accepted Answer

Accuracy quantifies the maximum permissible deviation between a measured or processed value and its true or reference value, typically expressed as a percentage of full scale, a direct value (e.g., ±mV), or in parts per million (ppm). It is a fundamental

Question 11

What is the Construction

Accepted Answer

This term describes the fundamental physical makeup and internal arrangement of a component, such as a capacitor, inductor, or resistor. It specifies the materials, layers, and structural design (e.g., film, ceramic, wirewound, or electrolytic) that defin

Question 12

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 13

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 14

What is the Load Force (Dynamic)

Accepted Answer

This parameter specifies the maximum continuous or cyclic mechanical force that a linear or rotary actuator can exert on a load while in motion, measured in Newtons (N) or pounds-force (lbf). It defines the operational output capability under dynamic cond

Question 15

What is the Load Force (Static)

Accepted Answer

The maximum static axial force that a linear actuator, bearing, or mechanical assembly can withstand or exert without causing permanent deformation or failure. This rating, typically measured in Newtons (N) or pounds-force (lbf), defines the upper limit f

Question 16

What is the Acceleration

Accepted Answer

A measure of the rate of change of velocity of an object, typically expressed in meters per second squared (m/s²) or g-force (g). In electronics, it is the primary parameter measured by accelerometers, which are sensors that convert mechanical motion into

Question 17

What is the Feedback Type

Accepted Answer

This parameter classifies the method by which a portion of the output signal is returned to the input to modify the system's behavior. It is a fundamental architectural distinction, primarily between **negative feedback**, which stabilizes gain, reduces d

Question 18

What is the Duty Cycle

Accepted Answer

It specifies the percentage of time a periodic signal or device is in its active or "on" state relative to its total period. For digital signals, it is calculated as (Pulse Width / Period) * 100%. This parameter is critical for controlling average power d

Question 19

What is the Stroke Length

Accepted Answer

Stroke Length refers to the total linear travel distance of an actuator's moving element (e.g., piston rod, plunger) from its fully retracted to its fully extended position. It is a fundamental mechanical specification that defines the range of motion the

Question 20

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 21

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 22

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Crouzet 80910002

26DBM10D2U-L

80510503

AE0203D04DF

AE0505D08DF

AE1010D44H40DF

ASB340C801ND0LF

ASB680C801ND0LF

FIT0257

FIT0285

AE0505D18H18DF