Name: 77061820 RES ARRAY 5 RES 82 OHM 6SIP
Brand: CTS Resistor Products
SKU: 77061820
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Number of Pins

Accepted Answer

It defines the quantity of input/output and power terminals, influencing the component's functionality, packaging size, and the layout density required on the PCB.

Question 5

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 6

What is the Height - Seated (Max)

Accepted Answer

This parameter specifies the maximum vertical dimension from the mounting surface (e.g., PCB) to the highest point of a component when it is fully seated and soldered in place. It is a critical mechanical clearance specification for determining the minimu

Question 7

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 8

What is the Temperature Coefficient

Accepted Answer

A dimensionless parameter, typically expressed in parts per million per degree Celsius (ppm/°C), that quantifies the rate of change of a component's primary electrical characteristic (e.g., resistance, capacitance) with temperature. It defines the compone

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Resistance (Ohms)

Accepted Answer

In electronic components, resistance is used to control current, divide voltage, dissipate power as heat, and protect sensitive parts from excessive current.

Question 11

What is the Resistor Matching Ratio

Accepted Answer

This parameter quantifies the relative tolerance between two or more resistors within a single integrated package or on a matched pair die. It specifies the maximum allowed deviation in resistance value between the components, typically expressed as a per

Question 12

What is the Resistor-Ratio-Drift

Accepted Answer

This parameter quantifies the long-term change in the ratio between the resistance values of two or more resistors within a single package (e.g., a resistor network or divider) over time and under environmental stress. It is typically expressed in parts p

Question 13

What is the Number of Resistors

Accepted Answer

This parameter specifies the total count of discrete resistive elements contained within a single electronic component package, such as a resistor network, SIP, or DIP array. It defines the component's functional density and is a primary factor in selecti

Question 14

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 15

What is the Tolerance

Accepted Answer

Tolerance specifies the permissible deviation from a component's nominal value, expressed as a percentage or absolute unit. It defines the manufacturing precision and directly impacts circuit performance, stability, and yield. Tight tolerances are critica

Question 16

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 17

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 18

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 19

What is the Power Per Element

Accepted Answer

This parameter specifies the maximum continuous power that a single functional unit (such as a resistor, transistor, or diode) within a multi-element component package can safely dissipate as heat. It is a critical thermal rating for ensuring reliability

Question 20

What is the Circuit Type

Accepted Answer

This parameter categorizes an electronic circuit based on its fundamental operational principle and primary function within a system. It defines the core signal processing or energy conversion behavior, such as amplification, oscillation, regulation, logi

CTS Resistor Products 77061820

EXB-V4V152JV

EXB-V4V122JV

EXB-V4V560JV

EXB-V4V561JV

EXB-V4V182JV

EXB-V4V153JV

EXB-V4V330JV

EXB-V4V333JV

EXB-V4V820JV

EXB-V4V273JV