Name: 2500-03-125-0 CBLE CARRIER 1.38H X 1.50W 1=1FT
Brand: Energy Chain
SKU: 2500-03-125-0
Price: 14.432 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Frame Type

Accepted Answer

This parameter specifies the structural form of the main chassis or housing for a device, such as a rack-mount, wall-mount, or DIN-rail enclosure. It defines the mechanical interface, mounting provisions, and overall form factor, which are critical for sy

Question 5

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 6

What is the Weight

Accepted Answer

A fundamental physical property measured in grams (g) or kilograms (kg), it quantifies the mass of a component. This parameter is critical for structural design, load calculations, and ensuring mechanical integrity in applications where mass impacts perfo

Question 7

What is the Minimum Bend Radius

Accepted Answer

The smallest radius to which a cable, wire, or flexible conduit can be bent without causing permanent deformation, damaging internal conductors, or compromising electrical performance. This critical mechanical specification, measured in millimeters or as

Question 8

What is the Loading Side

Accepted Answer

This parameter specifies the side of a board-to-board or wire-to-board connector where the cable or daughterboard is attached and inserted into the mating interface. It defines the orientation of the incoming conductors or PCB relative to the connector bo

Question 9

What is the Cavity Height

Accepted Answer

This dimension specifies the internal vertical clearance within a connector housing or component enclosure, measured in millimeters (mm) or inches (in). It defines the maximum allowable height for the mating contact or PCB that can be accommodated, direct

Question 10

What is the Cavity Width

Accepted Answer

The horizontal dimension of the internal recess or opening within a component's housing, such as a connector shell or terminal block base. This measurement, typically in millimeters, defines the maximum allowable width for accommodating internal parts lik

Question 11

What is the Outer Height

Accepted Answer

Outer Height refers to the maximum vertical dimension of a component or assembly, measured from its lowest mounting or reference surface to its highest external point. This critical mechanical parameter defines the component's spatial footprint in the ver

Question 12

What is the Outer Width

Accepted Answer

Outer Width refers to the maximum lateral dimension of a component's external housing or body, measured perpendicular to its primary axis. This key mechanical specification defines the spatial footprint required on a PCB or within an enclosure, directly i

Question 13

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences its mechanical fit within

Question 14

What is the Link Pitch

Accepted Answer

Link Pitch refers to the center-to-center distance between adjacent electrical contacts or pins within a connector or terminal block, typically measured in millimeters (mm). This dimension is critical for determining the connector's density, mating compat

Question 15

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 16

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 17

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Energy Chain 2500-03-125-0

ROB-13207

0452-02-150-100-0-2-1005

0452-02-100-150-0-2-1005

0181-01-037-048-0-0-990

0452-02-100-100-0-2-1005

0300-02-076-050-0-0-990

0181-01-050-078-0-0-990

0300-02-076-095-0-0-990

14-3-028-0

Z06-20-018-0