Name: B82721A2501N022 CMC 27MH 500MA 2LN TH
Brand: EPCOS - TDK Electronics
SKU: B82721A2501N022
Price: 1.55815 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Voltage Rating - AC

Accepted Answer

Voltage Rating - AC refers to the maximum sinusoidal AC voltage that an electronic component, device, or insulating material can safely withstand continuously without causing performance degradation or damage. It is typically expressed as the Root Mean Sq

Question 5

What is the Voltage Rating - DC

Accepted Answer

Voltage Rating - DC refers to the maximum direct current (DC) voltage that an electronic component, device, or insulating material can safely withstand continuously without causing performance degradation or damage.

Question 6

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 7

What is the Current Rating (Max)

Accepted Answer

Maximum Current Rating specifies the highest continuous current a component can safely carry without exceeding its thermal or electrical limits, thereby preventing permanent damage or performance degradation. It is a critical safety parameter for conducto

Question 8

What is the DC Resistance (DCR) (Max)

Accepted Answer

It specifies the maximum allowable direct current (DC) resistance of a component, primarily inductors, coils, or windings, measured in Ohms (Ω). This parameter quantifies the inherent resistive loss within the conductive material (e.g., copper wire) when

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Number of Lines

Accepted Answer

This parameter specifies the total count of independent data or signal pathways within a component, such as a memory chip, display driver, or communication interface. It directly defines the component's data width, addressing capacity, or multiplexing cap

Question 11

What is the Filter Type

Accepted Answer

This parameter categorizes a signal conditioning component based on its core frequency response characteristic, which defines the specific range of frequencies it passes or attenuates. Primary types include Low-Pass, High-Pass, Band-Pass, and Band-Stop (N

Question 12

What is the Inductance @ Frequency

Accepted Answer

Inductance @ Frequency specifies the nominal inductance value of a component, such as an inductor or choke, measured under a specific AC test signal frequency, typically expressed in Hertz (Hz). This parameter is critical because the effective inductance

Question 13

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 14

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 15

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 16

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 17

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 18

What is the Ratings

Accepted Answer

Ratings specify the absolute maximum and recommended operating limits for electrical, thermal, and environmental conditions, such as voltage, current, power, and temperature. These parameters define the safe operational boundaries and long-term reliabilit

Question 19

What is the Height (Max)

Accepted Answer

This parameter specifies the maximum allowable vertical dimension of a component's package, measured from its seating plane or mounting surface to its highest point. It is a critical mechanical constraint for determining the minimum required clearance wit

EPCOS - TDK Electronics B82721A2501N022

ELF-18D290B

ELF-18D850Y

ELF-18D428

ELF-18D850T

ELF-18D290S

ELF-18D435F

ELF-18D430

ELF-18D850B

ELF-18D419

ELF-18D650C