Name: 100430 3D Filament Beige PLA
Brand: Fabru GmbH
SKU: 100430
Price: 24.528 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 5

What is the Density

Accepted Answer

A measure of mass per unit volume, typically expressed in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³). In electronic components, it is a critical material property that influences the component's weight, thermal mass, and mecha

Question 6

What is the Filament Material

Accepted Answer

The substance used to form the thin, resistive wire or coil within an incandescent lamp or vacuum tube. Its core function is to emit light via incandescence when heated by an electric current. The material's properties—such as melting point, resistivity,

Question 7

What is the Filament Diameter

Accepted Answer

This parameter specifies the cross-sectional width of the fine wire or conductive path that serves as the light-emitting or resistive heating element within a component, such as an incandescent lamp or vacuum tube. Measured in millimeters (mm) or mils, it

Question 8

What is the Flex Strength

Accepted Answer

A measure of a material's ability to withstand bending stress without fracturing, typically quantified as the maximum stress (in MPa or psi) applied during a three-point bend test. This mechanical property is critical for components like flexible PCBs, co

Question 9

What is the Weight

Accepted Answer

A fundamental physical property measured in grams (g) or kilograms (kg), it quantifies the mass of a component. This parameter is critical for structural design, load calculations, and ensuring mechanical integrity in applications where mass impacts perfo

Question 10

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 11

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 12

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 13

What is the Tensile Strength

Accepted Answer

Tensile Strength is the maximum axial stress a material or component can withstand before fracturing under uniaxial tensile load, measured in units of pressure such as Pascals (Pa) or pounds per square inch (psi). It is a fundamental mechanical property t

Fabru GmbH 100430

ABS17BK5

ABS17PI5

ABS30TL5

ABS30YE5

ABS30PU5

ABS30GO5

ABS30NA5

PLA17BK5

PLA17BL5

PLA17GD5