Name: R6710-00 BRD SPT SNAP LOCK NYLON 9.6MM
Brand: Harwin Inc.
SKU: R6710-00
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 5

What is the Length - Overall

Accepted Answer

This parameter specifies the maximum linear dimension of a component or assembly along its primary axis, measured from its outermost extremities. It is a critical mechanical specification for determining spatial requirements, enclosure fit, and clearance

Question 6

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 7

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 8

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Question 9

What is the Between Board Height

Accepted Answer

This parameter specifies the vertical distance between the parallel surfaces of two adjacent printed circuit boards (PCBs) when they are mechanically mated and electrically connected via a board-to-board connector. It is a critical mechanical dimension fo

Question 10

What is the Holding Type

Accepted Answer

This parameter specifies the mechanical method used to secure a component, such as a sensor, connector, or module, to a panel, chassis, or PCB. It defines the interface for installation and strain relief, with common types including screw mounting, snap-i

Question 11

What is the Mounting Hole Diameter

Accepted Answer

This dimension specifies the inner diameter of the clearance hole in a component's chassis, bracket, or PCB mounting flange, measured in millimeters (mm) or inches (in). It defines the size of the fastener (e.g., screw, bolt, rivet) that can pass through,

Question 12

What is the Mounting Panel Thickness

Accepted Answer

This parameter specifies the range of panel thicknesses that a component's mounting hardware (e.g., a connector's nut or a switch's bushing) is designed to accommodate. It defines the minimum and maximum material thickness, typically in millimeters, that

Question 13

What is the Support Hole Diameter

Accepted Answer

This parameter specifies the inner diameter of the non-plated through-holes in a printed circuit board (PCB) designed to accommodate mechanical fasteners, standoffs, or guide pins. It is a critical dimension for ensuring proper clearance and alignment dur

Question 14

What is the Support Panel Thickness

Accepted Answer

This parameter specifies the range of panel thicknesses that a mounting bracket, chassis, or connector can physically accommodate and securely fasten to. It defines the minimum and maximum material thickness (typically in mm) that the component's clamping

Harwin Inc. R6710-00

SP1-4-01

SP2-12-01

SP3-4-01

SP3-10-01

LCBS-3-01

LCBS-6-01

LCBS-16-01

LCBS-TM-8-01

DLCBST-4-01

CBP50-C