Name: ANT4600 Digiwave Ultra Thin Flat Antenna
Brand: HOMEVISION TECHNOLOGY INC
SKU: ANT4600
Price: 43.992 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Return Loss

Accepted Answer

Return Loss is a parameter that quantifies the amount of signal reflection due to impedance mismatch at a transmission line or network port. It is defined as the decibel ratio of incident power to reflected power, a negative value typically expressed in p

Question 5

What is the Frequency Group

Accepted Answer

This parameter categorizes a component, typically a crystal, oscillator, or resonator, based on the specific frequency band or range of its fundamental output or resonance. It is a primary selection criterion used to quickly identify parts suitable for a

Question 6

What is the Frequency (Center/Band)

Accepted Answer

This parameter specifies the primary operating frequency range of an RF component, such as a filter, antenna, or amplifier. It is defined either as a single center frequency (in Hz) or as a lower and upper limit forming a passband or stopband. This specif

Question 7

What is the RF Family/Standard

Accepted Answer

This term categorizes a wireless communication device or module based on the specific radio frequency protocol, air interface, and network architecture it implements. It defines the fundamental operating rules for spectrum access, modulation, data framing

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Frequency Range

Accepted Answer

The span of electromagnetic frequencies over which a component, device, or system is designed to operate effectively, typically specified by its lower and upper limits in Hertz (Hz). This parameter defines the usable bandwidth for signal transmission, rec

Question 10

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 11

What is the Gain

Accepted Answer

Gain quantifies the amplification factor of a signal's power, voltage, or current as it passes through an active component or circuit. It is a dimensionless ratio, often expressed logarithmically in decibels (dB). This parameter is fundamental for designi

Question 12

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 13

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 14

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 15

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 16

What is the Number of Bands

Accepted Answer

This parameter specifies the total count of distinct, non-overlapping frequency ranges that a single antenna or filter component is designed to operate within. It is a fundamental specification for multi-band RF devices, directly determining their ability

Question 17

What is the VSWR

Accepted Answer

VSWR (Voltage Standing Wave Ratio) quantifies the impedance mismatch between a transmission line and its load. It is defined as the ratio of the maximum to minimum voltage amplitude along a line due to signal reflection. A value of 1:1 indicates perfect m

Question 18

What is the Antenna Type

Accepted Answer

This term categorizes the radiating element based on its fundamental design, operating principle, and radiation pattern. Key types include monopole, dipole, patch, helical, and Yagi-Uda. The selection dictates performance parameters such as impedance, ban

Question 19

What is the Height (Max)

Accepted Answer

This parameter specifies the maximum allowable vertical dimension of a component's package, measured from its seating plane or mounting surface to its highest point. It is a critical mechanical constraint for determining the minimum required clearance wit

HOMEVISION TECHNOLOGY INC ANT4600

ANT-433-PW-LP

ANT-433-PW-QW

ANT-433-CW-QW

ANT-418-CW-RH

ANT-315-PW-RA

ANT-916-PW-RA

ANT-868-SP

ANT-433-CW-HD

ANT-916-PMB

ANT-2.4-CW-RCS