Name: CN10-CA200-PL-RPL-15CXW-E CBL ASSY SMB MINI PLG-PLG 7.874"
Brand: JAE Electronics
SKU: CN10-CA200-PL-RPL-15CXW-E
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 6

What is the Frequency - Max

Accepted Answer

Maximum operating frequency defines the highest clock or signal rate at which a digital or RF component can reliably perform its intended function while meeting all specified timing, noise, and power integrity requirements. It is a critical performance ce

Question 7

What is the 1st Connector Mounting Type

Accepted Answer

This parameter specifies the mechanical method used to secure the first connector in a multi-connector assembly to a panel, chassis, or PCB. Common types include panel-mount (using nuts or clips), board-mount (soldered directly to a PCB), or flange-mount

Question 8

What is the 2nd Connector Mounting Type

Accepted Answer

This parameter specifies the mechanical attachment method for a secondary or auxiliary connector on a device or assembly. It defines how the connector is secured to the panel, chassis, or PCB, such as through panel-mount with nuts, flange-mount with screw

Question 9

What is the 1st Contact Gender

Accepted Answer

Specifies the electrical gender (male/pin or female/socket) of the initial contact position within a multi-pin connector. This designation is critical for determining mating compatibility, ensuring correct signal routing, and preventing mechanical misalig

Question 10

What is the 2nd Contact Gender

Accepted Answer

This parameter specifies the electrical gender of the secondary or auxiliary contact set within a multi-contact connector. It defines whether these contacts are male (pins) or female (sockets), which is essential for ensuring proper mating compatibility w

Question 11

What is the Cable Impedance

Accepted Answer

A characteristic impedance, typically 50 or 75 Ohms for coaxial cables, that defines the ratio of voltage to current for a propagating signal wave. It is determined by the cable's physical geometry and dielectric material. Maintaining a controlled, matche

Question 12

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 13

What is the 1st Connector Mounting Feature

Accepted Answer

This parameter specifies the primary mechanical interface or attachment point on the first connector in a multi-connector assembly or system. It defines the method (e.g., threaded inserts, snap-fit latches, flange with screw holes) used to secure that spe

Question 14

What is the 2nd Connector Mounting Feature

Accepted Answer

This parameter specifies the mechanical attachment method for a secondary or auxiliary connector within a multi-connector assembly or housing. It defines the interface—such as threaded inserts, snap-fit latches, or mounting flanges—that secures this addit

Question 15

What is the Cable Type

Accepted Answer

A classification based on a cable's core construction, electrical characteristics, and intended application. It defines the fundamental signal or power transmission medium, such as coaxial (RF), twisted pair (data/telecom), multi-conductor (control/power)

Question 16

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 17

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 18

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 19

What is the 1st Connector

Accepted Answer

A primary electrical interface designed to establish the initial or most critical connection point for power, data, or signal transfer within a system. It often defines the main system interface standard (e.g., USB, D-Sub, power inlet) and dictates the ma

Question 20

What is the 2nd Connector

Accepted Answer

A secondary or auxiliary electrical interface on a device, providing additional connectivity for signals, power, or data. It expands the system's I/O capacity, enables modular expansion, or supports specific functions like programming, debugging, or daisy

Question 21

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 22

What is the Style

Accepted Answer

This parameter categorizes the physical form and structural design of a component, such as a connector, switch, or enclosure. It defines the overall mechanical configuration, including shape, mounting method, and key external features, which directly dete

JAE Electronics CN10-CA200-PL-RPL-15CXW-E

58-180-1M

58-1200-1M

59-048-1M

59-1200-1M

62-060-1M

58-060-1A

F6-6B

F6-25B

F6-12W

BU-5050-B-12-0