Name: VDV814-609 CONN ADAPT JACK-JACK F 1=10PCS
Brand: Klein Tools, Inc.
SKU: VDV814-609
Price: 16.696 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Mounting Feature

Accepted Answer

Mounting Feature refers to the physical design characteristics on an electronic component or enclosure that enable it to be mechanically attached to a circuit board, panel, or chassis, such as holes, tabs, flanges, or adhesive pads.

Question 6

What is the Adapter Series

Accepted Answer

Adapter Series is a manufacturer's collective designation for a range of power adapter products sharing common design features or target applications.

Question 7

What is the Adapter Type

Accepted Answer

Adapter Type classifies power adapters based on their output interface, power specifications, or intended host device.

Question 8

What is the Center Gender

Accepted Answer

Center Gender refers to the type of the coaxial connector's center contact: Male (Pin) or Female (Socket).

Question 9

What is the Conversion Type

Accepted Answer

Conversion Type refers to the electrical energy form transformation performed by a power module or circuit, such as AC-DC, DC-DC, or DC-AC.

Question 10

What is the Body Material

Accepted Answer

Body Material refers to the primary material constituting the main body of a component, distinct from its leads or coating.

Question 11

What is the Mating Cycles

Accepted Answer

The specified number of times a separable electrical connector can be successfully mated (connected) and unmated (disconnected) while maintaining its electrical and mechanical performance within datasheet specifications. This rating is a key reliability m

Question 12

What is the Center Contact Material

Accepted Answer

This specification defines the metal or alloy used for the central conductive pin or socket within a coaxial or RF connector. Its electrical conductivity, corrosion resistance, and mechanical durability are critical for maintaining signal integrity, minim

Question 13

What is the Body Finish

Accepted Answer

This specification describes the surface treatment applied to the main structural housing of a component, such as plating, anodizing, painting, or powder coating. It serves to enhance corrosion resistance, improve electrical conductivity (e.g., for EMI sh

Question 14

What is the Center Contact Plating

Accepted Answer

The conductive surface treatment applied to the central pin or socket of a connector, typically using metals like gold, silver, or nickel. Its primary function is to ensure low and stable contact resistance, enhance corrosion resistance, and improve durab

Question 15

What is the Convert From (Adapter End)

Accepted Answer

This parameter specifies the type of electrical input that a power adapter is designed to accept at its source connection end. It defines the nominal voltage (e.g., 100-240V AC) and frequency (e.g., 50/60 Hz) of the mains supply or other input source, est

Question 16

What is the Convert To (Adapter End)

Accepted Answer

Specifies the electrical interface standard or connector type that the output end of a power adapter is designed to mate with, such as USB-C, barrel jack, or proprietary terminal. This defines the physical and electrical compatibility between the adapter

Question 17

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 18

What is the Frequency - Max

Accepted Answer

Maximum operating frequency defines the highest clock or signal rate at which a digital or RF component can reliably perform its intended function while meeting all specified timing, noise, and power integrity requirements. It is a critical performance ce

Question 19

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 20

What is the Insertion Loss

Accepted Answer

Insertion Loss quantifies the reduction in signal power that occurs when a component (e.g., connector, cable, filter) is inserted into a transmission line, measured in decibels (dB). It is a fundamental performance metric for passive RF/microwave and high

Question 21

What is the Fastening Type

Accepted Answer

This parameter specifies the mechanical method used to secure a component, connector, or assembly to a panel, chassis, or another component. It defines the interface for attachment, such as screw threads, snap-fit clips, bayonet locks, or adhesive bonding

Question 22

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 23

What is the Includes

Accepted Answer

This parameter indicates that the listed product or kit contains one or more additional, specified components beyond the primary item. It is used to clarify the complete contents of a package, assembly, or reference design, ensuring accurate BOM creation

Question 24

What is the Impedance

Accepted Answer

Impedance is the total opposition a circuit presents to alternating current, measured in Ohms (Ω). It is a complex quantity combining resistance (real part) and reactance (imaginary part) from capacitance and inductance. This parameter is fundamental for

Question 25

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 26

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 27

What is the Dielectric Material

Accepted Answer

A dielectric material is an electrical insulator that can be polarized by an applied electric field. Its primary function is to store electrostatic energy and provide electrical isolation between conductors. The key property is its dielectric constant (k)

Question 28

What is the Style

Accepted Answer

This parameter categorizes the physical form and structural design of a component, such as a connector, switch, or enclosure. It defines the overall mechanical configuration, including shape, mounting method, and key external features, which directly dete

Klein Tools, Inc. VDV814-609

82-101-RFX

901-294

83-1F

83-1T

82-66

82-64

031-4791

31-220H

082-5588-RFX

31-218-RFX