Name: BL23E22-02D-05RO BLDC MOTOR WITH ENCODER
Brand: Lin Engineering
SKU: BL23E22-02D-05RO
Price: 119.144 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Diameter - Shaft

Accepted Answer

Diameter - Shaft refers to the measurement of the width of a cylindrical rod or axle, which serves as the primary rotating or force-transmitting member in a mechanical assembly, typically measured in millimeters (mm) or inches (in).

Question 5

What is the Mounting Hole Spacing

Accepted Answer

Mounting Hole Spacing refers to the center-to-center distance between adjacent holes (e.g., screw or bolt holes) on a component, bracket, or chassis, designed for mechanical attachment, typically measured in millimeters (mm) or inches (in).

Question 6

What is the Function

Accepted Answer

“Function” refers to the specific, definite, and repeatable core purpose or task that a component, device, or system is designed and built to perform.

Question 7

What is the RPM

Accepted Answer

Revolutions Per Minute (RPM) is the rotational speed unit for rotating machinery (e.g., motors, fans), indicating the number of complete turns a shaft makes per minute.

Question 8

What is the Length - Shaft and Bearing

Accepted Answer

This dimension specifies the total axial length of the rotating shaft, including the portion(s) that interface with bearing surfaces. It is a critical mechanical parameter that determines the shaft's fit within the bearing assembly, ensuring proper axial

Question 9

What is the Gear Reduction Ratio

Accepted Answer

This parameter defines the ratio of input rotational speed to output rotational speed in a gear train or gearmotor. It quantifies the mechanical advantage, where a ratio greater than 1:1 indicates a reduction in output speed and a proportional increase in

Question 10

What is the Voltage - Rated

Accepted Answer

Voltage - Rated refers to the operating voltage that a device, component, or insulation material is designed to withstand continuously.

Question 11

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 12

What is the Motor Type

Accepted Answer

This parameter categorizes an electric motor based on its fundamental operating principle and construction. It defines the core mechanism for converting electrical energy into mechanical rotation, such as DC brushed, brushless DC (BLDC), stepper, AC induc

Question 13

What is the Torque - Rated (oz-in / mNm)

Accepted Answer

This parameter specifies the maximum continuous rotational force a motor, actuator, or fastener can safely deliver or withstand without performance degradation or damage. It defines the upper limit of the device's mechanical output or input capability und

Question 14

What is the Torque - Max Momentary (oz-in / mNm)

Accepted Answer

This parameter specifies the maximum short-duration rotational force a motor or actuator can deliver without sustaining damage, typically measured in ounce-inches (oz-in) or millinewton-meters (mNm). It defines the peak output capability for overcoming in

Question 15

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 16

What is the Weight

Accepted Answer

A fundamental physical property measured in grams (g) or kilograms (kg), it quantifies the mass of a component. This parameter is critical for structural design, load calculations, and ensuring mechanical integrity in applications where mass impacts perfo

Question 17

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 18

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 19

What is the Encoder Type

Accepted Answer

A classification based on the core sensing principle and output signal format used to transduce mechanical position or motion into an electrical signal. Primary types include incremental (quadrature pulses for relative movement), absolute (unique digital

Question 20

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 21

What is the Power - Rated

Accepted Answer

The maximum continuous electrical power that a component, device, or system is designed to handle or deliver under specified operating conditions without risk of damage or performance degradation. It is a key safety and reliability parameter that defines

Question 22

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 23

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Lin Engineering BL23E22-02D-05RO

M223X0003

825140A40001MP

825204C40450M

825244A40006MP

825244C40030MH

828120X00130Z

828690X02000WFFC

MXN12FB12F

PKN7EB105C7

PPN13PB11C2