Name: MIC2525-1BM USB POWER CONTROL SWITCH
Brand: Micrel Inc.
SKU: MIC2525-1BM
Price: 0.56 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Voltage - Supply (Vcc/Vdd)

Accepted Answer

Voltage - Supply (Vcc/Vdd) The supply voltage is the nominal DC input that powers a digital or analog integrated circuit and defines its logic levels; its allowable range (unit: V DC) is central to device selection and power rail design.

Question 6

What is the Current - Output (Max)

Accepted Answer

Maximum Output Current refers to the highest safe level of current that a power supply, amplifier, or driver can continuously source or sink at its output without causing permanent performance degradation or damage. It is a key rating parameter defining t

Question 7

What is the Ratio - Input:Output

Accepted Answer

Ratio - Input:Output is a numerical value describing the core proportional relationship between the output quantity and the input quantity of a system, component, or conversion process. It is a dimensionless ratio (or may have specific compound units) use

Question 8

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 9

What is the Interface

Accepted Answer

A standardized set of electrical signals, physical connectors, and communication protocols that enables data exchange and control between separate electronic systems or subsystems. It defines the mechanical, electrical, and logical rules for interoperabil

Question 10

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 11

What is the Fault Protection

Accepted Answer

A set of integrated hardware and software mechanisms designed to detect, respond to, and mitigate abnormal operating conditions that could damage a system or its components. Core functions include overcurrent, overvoltage, undervoltage, and overtemperatur

Question 12

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 13

What is the Switch Type

Accepted Answer

It categorizes the fundamental operating mechanism and contact configuration of an electrical switch, defining its actuation method (e.g., toggle, pushbutton, rocker, slide) and internal switching logic (e.g., SPST, DPDT, momentary, latching). This classi

Question 14

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 15

What is the Output Configuration

Accepted Answer

This parameter specifies the electrical arrangement and signal type of a component's output stage, such as push-pull, open-drain, open-collector, or differential. It defines the output's drive capability, logic levels, and compatibility with other circuit

Question 16

What is the Rds On (Typ)

Accepted Answer

It specifies the typical drain-source on-state resistance of a power MOSFET when fully enhanced by its gate voltage. This resistance, measured in milliohms (mΩ), is the primary determinant of conduction loss during operation. A lower value directly transl

Question 17

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 18

What is the Input Type

Accepted Answer

This parameter specifies the nature of the electrical signal or physical quantity that a device's input circuitry is designed to accept and process. It defines the fundamental interface requirement, such as analog voltage, analog current, digital logic le

Question 19

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 20

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 21

What is the Voltage - Load

Accepted Answer

This parameter specifies the voltage level that must be applied across the output terminals of a power supply, driver, or regulator to properly operate the connected electrical load. It is a critical specification for ensuring compatibility between the so

Question 22

What is the Number of Outputs

Accepted Answer

This parameter specifies the total count of independent signal or power delivery channels available from a component, such as a power supply, amplifier, or logic device. It defines the component's capacity to drive multiple loads or interface with several

Micrel Inc. MIC2525-1BM

IR6220

DRV101T

TPS2013DR

TPS2044D

ULN2003AN

IPS031

TPS2212IDB

TPS2216ADB

TPS2010AD

TPS2015D