Name: TL431AILP IC VREF SHUNT ADJ 1% TO92-3
Brand: Microchip Technology
SKU: TL431AILP
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Voltage - Input

Accepted Answer

Voltage - Input refers to the DC or AC potential difference applied to the power input pin or terminal of a device, circuit, or component, measured in Volts (V). It defines the energy supply level required for normal operation and is the primary electrica

Question 6

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 7

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 8

What is the Voltage - Output (Min/Fixed)

Accepted Answer

Specifies the minimum guaranteed or factory-set output voltage level of a power supply or voltage regulator, measured in volts (V). For adjustable regulators, this is the lowest voltage achievable within its range; for fixed regulators, it is the nominal

Question 9

What is the Noise - 0.1Hz to 10Hz

Accepted Answer

This parameter quantifies the extremely low-frequency voltage noise inherent to a component, such as an operational amplifier or voltage reference, over the 0.1 Hz to 10 Hz bandwidth. It is measured as the peak-to-peak voltage fluctuation (in microvolts o

Question 10

What is the Noise - 10Hz to 10kHz

Accepted Answer

This parameter quantifies the integrated root-mean-square (RMS) noise voltage or current generated by a component (typically an amplifier, voltage reference, or sensor) over the critical low-frequency band from 10 Hz to 10 kHz. It is a key metric for asse

Question 11

What is the Temperature Coefficient

Accepted Answer

A dimensionless parameter, typically expressed in parts per million per degree Celsius (ppm/°C), that quantifies the rate of change of a component's primary electrical characteristic (e.g., resistance, capacitance) with temperature. It defines the compone

Question 12

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 13

What is the Current - Cathode

Accepted Answer

The maximum continuous current that can flow from the cathode to the anode terminal of a vacuum tube or gas discharge device under specified operating conditions, measured in Amperes (A) or milliamperes (mA). This rating defines the upper thermal and emis

Question 14

What is the Current - Output

Accepted Answer

Current - Output refers to the continuous or instantaneous current value that a circuit, device, or component (e.g., power supply, amplifier, driver IC) can source or sink at its output port, with the base unit of Amperes (A). It is a key rating parameter

Question 15

What is the Voltage - Output (Max)

Accepted Answer

The maximum voltage a power supply, regulator, or driver can safely and continuously provide at its output terminals under specified operating conditions. This absolute maximum rating, measured in volts (V), defines the upper boundary of the device's outp

Question 16

What is the Reference Type

Accepted Answer

A reference type specifies the fundamental architecture and operating principle of a voltage or current reference component, such as bandgap, buried zener, or XFET. This classification determines core performance characteristics like initial accuracy, tem

Question 17

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 18

What is the Tolerance

Accepted Answer

Tolerance specifies the permissible deviation from a component's nominal value, expressed as a percentage or absolute unit. It defines the manufacturing precision and directly impacts circuit performance, stability, and yield. Tight tolerances are critica

Question 19

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 20

What is the Current - Supply

Accepted Answer

Slew Rate is the maximum rate of change of the amplifier's output voltage, typically measured in volts per microsecond (V/µs). It limits how fast the output can respond to a large, fast-changing input signal and is critical for large-signal and high-frequ

Question 21

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Microchip Technology TL431AILP

MAX872CPA

MAX874CPA

MAX876BCPA

LM236AH-5.0/NOPB

LM285M-1.2/NOPB

LM385BM-2.5/NOPB

LM385Z-1.2/NOPB

LM236AH-2.5/NOPB

LM285M/NOPB

LM385BYZ-1.2/NOPB