Name: MGJ2D051802SC DC DC CONVERTER 18V -2.5V 1.6W
Brand: Murata Power Solutions Inc.
SKU: MGJ2D051802SC
Price: 6.768 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Current - Output (Max)

Accepted Answer

Maximum Output Current refers to the highest safe level of current that a power supply, amplifier, or driver can continuously source or sink at its output without causing permanent performance degradation or damage. It is a key rating parameter defining t

Question 6

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 7

What is the Voltage - Input (Min)

Accepted Answer

The minimum DC or AC potential difference required at the power input terminal for a device or circuit to maintain its specified performance and functionality. This lower boundary of the operating voltage range is critical for ensuring reliable startup, s

Question 8

What is the Voltage - Output 1

Accepted Answer

This parameter specifies the nominal DC voltage level produced by the primary output channel of a power supply, regulator, or converter module. It is a fundamental electrical characteristic that defines the potential supplied to the load, measured in volt

Question 9

What is the Voltage - Output 2

Accepted Answer

This parameter specifies the nominal voltage level provided by the second independent output channel of a multi-output power supply or regulator. It defines the electrical potential for powering a secondary load or subsystem, and its value, along with ass

Question 10

What is the Voltage - Output 3

Accepted Answer

This parameter specifies the nominal voltage level and its permissible range for the third independent output channel of a multi-output power supply or regulator IC. It defines the electrical potential provided to a specific load or subsystem, with the un

Question 11

What is the Voltage - Output 4

Accepted Answer

This parameter specifies the nominal voltage level provided by the fourth independent output channel of a multi-output power supply or regulator IC. It is a key electrical characteristic that defines the potential difference available to power downstream

Question 12

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 13

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 14

What is the Control Features

Accepted Answer

These are the configurable parameters or dedicated hardware/software interfaces that enable an operator or system to adjust, command, or monitor a device's operational state. They include inputs for enabling/disabling functions, setting thresholds (e.g.,

Question 15

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 16

What is the Power (Watts)

Accepted Answer

It quantifies the rate of energy transfer or conversion within an electrical system, measured in Joules per second. This fundamental parameter defines the capacity of a source to deliver energy or the amount consumed by a load. In component specifications

Question 17

What is the Number of Outputs

Accepted Answer

This parameter specifies the total count of independent signal or power delivery channels available from a component, such as a power supply, amplifier, or logic device. It is a fundamental capacity metric that defines how many distinct loads or subsequen

Question 18

What is the Voltage - Isolation

Accepted Answer

This parameter specifies the maximum potential difference that can be safely sustained between two isolated circuits within a component, such as an optocoupler, transformer, or isolated amplifier. It is a critical safety and reliability rating, typically

Question 19

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 20

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 21

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 22

What is the Voltage - Input (Max)

Accepted Answer

Specifies the absolute maximum DC or AC voltage that can be safely applied to a component's input terminal without risking permanent damage or dielectric breakdown. This is a critical safety parameter in the Absolute Maximum Ratings section of a datasheet

Question 23

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 24

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 25

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 26

What is the Efficiency

Accepted Answer

Efficiency quantifies the ratio of useful output power to total input power, expressed as a percentage (%). It is a critical performance metric for power conversion components (e.g., regulators, converters, amplifiers) and energy-consuming devices (e.g.,

Murata Power Solutions Inc. MGJ2D051802SC

78SR106VC

78SR112VC

78ST133VC

78ST112VC

PT5101N

PT5102S

PT6103A

PT6202R

PT6304R

78ST305HC