Name: LNCD1-16M CRYSTAL 16.0000MHZ 8PF SMD
Brand: NDK America, Inc.
SKU: LNCD1-16M
Price: 0.488 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Height - Seated (Max)

Accepted Answer

This parameter specifies the maximum vertical dimension from the mounting surface (e.g., PCB) to the highest point of a component when it is fully seated and soldered in place. It is a critical mechanical clearance specification for determining the minimu

Question 7

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 8

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the ESR (Equivalent Series Resistance)

Accepted Answer

A measure of the inherent resistive losses within a capacitor, primarily in its dielectric and terminals, modeled as a series resistor. It causes power dissipation (I²R heating), reduces efficiency in filtering and energy storage applications, and limits

Question 11

What is the Frequency

Accepted Answer

Frequency is the number of complete cycles a periodic signal completes per unit of time, measured in Hertz (Hz). It defines the fundamental rate of oscillation for clocks, carriers, and AC signals, determining timing accuracy, bandwidth allocation, and re

Question 12

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 13

What is the Frequency Stability

Accepted Answer

A measure of the maximum permissible deviation of an oscillator's output frequency from its nominal value over a defined set of conditions, typically expressed in parts per million (ppm) or percentage (%). Key influencing factors include temperature varia

Question 14

What is the Load Capacitance

Accepted Answer

It specifies the total external capacitance present at the output pin of an oscillator or clock driver circuit, measured in picofarads (pF). This value is critical for frequency-determining components like crystals and ceramic resonators, as it directly i

Question 15

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 16

What is the Frequency Tolerance

Accepted Answer

A specified maximum allowable deviation, expressed as a percentage (%) or in parts per million (ppm), of a component's actual resonant or operating frequency from its nominal value under defined conditions (e.g., temperature, aging). It is a critical para

Question 17

What is the Operating Mode

Accepted Answer

This parameter defines the specific state or configuration in which a device or circuit actively performs its intended function. It determines the fundamental behavior of the component, such as amplification, switching, regulation, or signal conversion, a

Question 18

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 19

What is the Ratings

Accepted Answer

Ratings specify the absolute maximum and recommended operating limits for electrical, thermal, and environmental conditions, such as voltage, current, power, and temperature. These parameters define the safe operational boundaries and long-term reliabilit

NDK America, Inc. LNCD1-16M

ECS-80-S-1

ECS-49-S-1

ECS-221-S-1

CA-301 10.2450M-C

ECS-40-20-1

ECS-51-S-1

ECS-59-S-5P-TR

ECS-51-20-5P-TR

ECS-3X8

ECS-24-32-1