Name: 63642506143 5 x 5/16 - 24 In. M-Den Non-Vacu
Brand: Norton
SKU: 63642506143
Price: 41.21 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 5

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 6

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 7

What is the Abrasive Material

Accepted Answer

Abrasive Material refers to a hard, wear-resistant substance used to remove material from a workpiece surface through mechanical action, such as grinding, polishing, or cutting. Its core function is controlled surface finishing, deburring, or shaping. Key

Question 8

What is the Abrasive Grade

Accepted Answer

A measure of the particle size and coarseness of the grit embedded in a grinding or cutting tool's surface, typically specified by a standardized number (e.g., 80, 120, 220). A lower number indicates larger, coarser particles for aggressive material remov

Question 9

What is the Abrasive Grit

Accepted Answer

A measure of particle size for abrasive media, typically specified by a mesh number (e.g., #80, #220) indicating the number of openings per linear inch in the sieve used for grading. A higher grit number corresponds to a finer particle size, which directl

Question 10

What is the Micron Size

Accepted Answer

This parameter specifies the nominal diameter of individual particles or the pore size of a filter medium, measured in micrometers (µm). It is a critical specification for filters, abrasive powders, and materials like ferrite cores, defining their ability

Question 11

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 12

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 13

What is the Diameter

Accepted Answer

A fundamental linear dimension specifying the width of a circular or cylindrical object, such as a wire, connector, shaft, or lens. It is a critical geometric parameter that determines mechanical fit, current-carrying capacity, optical properties, and spa

Question 14

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Norton 63642506143

503585-1

503669-1

.1MIC 3M661X DLF 3MIL 5 IN

.5MIC 3M661X DLF 3MIL 5.5 IN

1MIC 3M661X DLF 3MIL 6X6 IN

15MIC 3M661X DLF 3MIL 4.5 IN

3MIC 3M661X DLF 3MIL 4.5 IN

30MIC 3M661X DLF 3MIL 6X6 IN

6MIC 3M661X DLF 3MIL 4.5 IN

.5MIC 3M662XW DLF 3MIL TH 4 IN