Name: 76-ST22-1/4L NON INS SPADE TERM 22-18G 50 BAG
Brand: NTE Electronics, Inc
SKU: 76-ST22-1/4L
Price: 3.84 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Contact Material

Accepted Answer

Contact Material refers to the specific metal or alloy used at the interface where two conductors meet to establish an electrical path in connectors, switches, or relays. Its core properties include conductivity (affecting contact resistance), hardness (a

Question 5

What is the Insulation Diameter

Accepted Answer

Insulation Diameter refers to the overall outer diameter of a wire or cable's insulation system, encompassing the primary insulation and any additional layers like shielding or jacketing. It is a critical linear dimension specifying the physical footprint

Question 6

What is the Length - Ring Center to Termination

Accepted Answer

This dimension specifies the axial distance from the geometric center of a ring terminal's barrel (where the wire is crimped) to the start of its mating interface (e.g., the beginning of a spade or fork). It is a critical mechanical parameter for ensuring

Question 7

What is the Length - Termination

Accepted Answer

This parameter specifies the axial distance from the end of a component's body or a defined reference point to the tip of its electrical lead or terminal. It is a critical mechanical dimension that determines the component's protrusion through a PCB and t

Question 8

What is the Tongue Inside Opening

Accepted Answer

This dimension specifies the internal width of the female connector's mating cavity or "tongue," measured in millimeters (mm) or inches (in). It is a critical mechanical parameter that determines the maximum allowable thickness of the male connector's mat

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Terminal Type

Accepted Answer

This parameter defines the physical form and connection method of a component's electrical interface, such as screw terminal, quick-connect tab, solder lug, or pin header. It dictates the required assembly tooling, wiring technique, and influences connect

Question 11

What is the Stud/Tab Size

Accepted Answer

This parameter specifies the key dimensions of the metal mounting stud or tab on a power semiconductor package (e.g., TO-3, TO-220). It defines the hole size or land pattern required on a heatsink or PCB for secure mechanical attachment and efficient ther

Question 12

What is the Contact Finish

Accepted Answer

A conductive surface treatment applied to the electrical contact areas of connectors, switches, or relay terminals. Its primary functions are to protect the base metal from oxidation and corrosion, reduce contact resistance, and enhance solderability and

Question 13

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 14

What is the Length - Overall

Accepted Answer

This parameter specifies the maximum linear dimension of a component or assembly along its primary axis, measured from its outermost extremities. It is a critical mechanical specification for determining spatial requirements, enclosure fit, and clearance

Question 15

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 16

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 17

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 18

What is the Wire Gauge

Accepted Answer

A standardized system for specifying the diameter or cross-sectional area of an electrical conductor, typically defined by the American Wire Gauge (AWG) standard. It inversely relates to the numerical gauge value; a smaller AWG number indicates a larger c

Question 19

What is the Material - Insulation

Accepted Answer

A dielectric substance used to electrically isolate conductive elements, preventing current leakage and short circuits. Its primary function is to ensure operational safety and signal integrity. Key properties include dielectric strength (kV/mm), volume r

Question 20

What is the Insulation

Accepted Answer

A dielectric barrier that prevents the flow of electrical current between conductors or to ground. Its primary function is to ensure electrical safety, prevent short circuits, and maintain signal integrity by providing high resistance. Key properties incl

Question 21

What is the Width - Outer Edges

Accepted Answer

This parameter specifies the maximum lateral dimension between the two outermost physical boundaries of a component's body or package, excluding any protruding leads or mounting features. It is a critical mechanical envelope dimension used to verify spati

NTE Electronics, Inc 76-ST22-1/4L

35559

320862

32589

MVU10-8FK

MVU14-10FLK

35152

325150

322451

322249

324165