Name: HCPL2531SD OPTOISO 2.5KV 2CH TRANS 8SMD
Brand: onsemi
SKU: HCPL2531SD
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 7

What is the Current Transfer Ratio (Max)

Accepted Answer

Current Transfer Ratio (Max) refers to the maximum nominal ratio of the maximum output current of the photosensitive device on the output side to the maximum input current driving the LED on the input side in an optocoupler or opto-isolator under specifie

Question 8

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 9

What is the Voltage - Output (Max)

Accepted Answer

Specifies the highest safe DC potential a power supply, regulator, or driver can continuously provide at its output terminals, measured in volts (V). This absolute maximum rating defines the upper boundary of the device's adjustable or fixed output range

Question 10

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 11

What is the Turn On / Turn Off Time (Typ)

Accepted Answer

This parameter specifies the typical time interval required for a semiconductor switching device (e.g., MOSFET, IGBT) to transition between its fully off and fully on states, and vice versa, under nominal operating conditions. It is a key dynamic performa

Question 12

What is the Rise / Fall Time (Typ)

Accepted Answer

This parameter specifies the typical duration for a digital signal to transition between defined logic levels, measured from 10% to 90% (for rise time) or 90% to 10% (for fall time) of the voltage swing. It is a critical metric for timing analysis, signal

Question 13

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 14

What is the Number of Channels

Accepted Answer

This parameter specifies the total count of independent, parallel signal paths or data streams that a component (e.g., an amplifier, ADC, DAC, multiplexer, or communication IC) can process or handle simultaneously. It is a fundamental capacity metric that

Question 15

What is the Current - DC Forward (If) (Max)

Accepted Answer

This parameter specifies the maximum allowable continuous direct current that can flow through a semiconductor junction (e.g., in a diode or LED) in the forward-biased direction without causing thermal damage or performance degradation. It is a critical A

Question 16

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 17

What is the Voltage - Forward (Vf) (Typ)

Accepted Answer

This parameter specifies the typical forward voltage drop across a semiconductor junction (e.g., in a diode or LED) when conducting a specified test current. It is a key indicator of conduction loss and power efficiency, measured in volts (V). The value i

Question 18

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 19

What is the Input Type

Accepted Answer

This parameter specifies the nature of the electrical signal or physical quantity that a device's input circuitry is designed to accept and process. It defines the fundamental interface requirement, such as analog voltage, analog current, digital logic le

Question 20

What is the Current - Output / Channel

Accepted Answer

This parameter specifies the maximum continuous current that a single, independent output channel within a multi-channel device (e.g., a multi-phase regulator, LED driver array, or multi-port USB controller) is designed to source or sink. It defines the p

Question 21

What is the Voltage - Isolation

Accepted Answer

This specification defines the maximum potential difference that can be safely and continuously applied between two electrically isolated circuits within a single component, such as an optocoupler, transformer, or isolated power supply. It is a critical s

Question 22

What is the Current Transfer Ratio (Min)

Accepted Answer

The minimum nominal ratio of the output-side photodetector's current to the input-side LED's driving current in an optocoupler or optoisolator under specified test conditions. This parameter defines the worst-case current transfer efficiency, guaranteeing

Question 23

What is the Vce Saturation (Max)

Accepted Answer

This parameter specifies the maximum collector-emitter voltage drop across a bipolar junction transistor (BJT) when it is driven into hard saturation under specified base current and collector current conditions. It is a key metric for evaluating conducti

Question 24

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

onsemi HCPL2531SD

4N37

H11F1

4N36

MCT26

PS2506-2

CNY171300

CNY173300

H11A1300

H11D2300

MCT2200300