Name: SE150P-LR8 EXPAND SLEEVING 1.5" X 50' GRAY
Brand: Panduit Corp
SKU: SE150P-LR8
Price: 159.84 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 6

What is the Type Attributes

Accepted Answer

A set of descriptive characteristics that categorize a component by its fundamental operational principle, physical construction, or primary application domain. These attributes, such as "Ceramic Capacitor," "MOSFET," or "Digital Isolator," form the highe

Question 7

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 8

What is the Liquid Protection

Accepted Answer

Liquid Protection refers to a component's ability to resist ingress and damage from water or other liquids, quantified by standardized ingress protection (IP) ratings. It defines the environmental robustness for applications exposed to moisture, condensat

Question 9

What is the Environment Protection

Accepted Answer

This specification defines the component's ability to withstand and operate reliably under specific external environmental stresses, such as moisture, dust, chemicals, or mechanical shock. It is typically indicated by standardized ingress protection (IP)

Question 10

What is the Heat Protection

Accepted Answer

A safety mechanism that prevents thermal damage by monitoring temperature and automatically interrupting power or reducing performance when a critical threshold is exceeded. It is implemented via integrated sensors (e.g., thermal cutoffs, PTC thermistors)

Question 11

What is the Abrasion Protection

Accepted Answer

A protective layer or sleeve applied to the exterior of a cable or wire harness to enhance its resistance to wear, scraping, and physical damage from repeated contact with surfaces or other objects. It is a critical mechanical specification that extends s

Question 12

What is the Wall Thickness

Accepted Answer

This parameter specifies the thickness of the material forming the main body or housing of a component, such as a connector shell, cable conduit, or mechanical enclosure. Measured in millimeters (mm) or inches (in), it is a critical determinant of mechani

Question 13

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 14

What is the Diameter - Inside, Non-Expanded

Accepted Answer

This parameter specifies the inner diameter of a tubular component (e.g., a heat-shrink sleeve, ferrule, or protective boot) in its relaxed, pre-installed state. It defines the minimum bore size for accepting a wire, cable, or other object prior to any me

Question 15

What is the Diameter - Inside, Expanded

Accepted Answer

This dimension specifies the inner diameter of a flexible or expandable component, such as a heat-shrink tubing or a strain relief boot, after it has been fully expanded to its maximum allowable size during installation. It defines the largest object or c

Question 16

What is the Diameter - Outside, Non-Expanded

Accepted Answer

This parameter specifies the outer diameter of a flexible or expandable component (such as a braided sleeve, conduit, or heat shrink tubing) in its relaxed, non-deployed state. It is a critical dimensional specification for ensuring proper fit within an a

Question 17

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 18

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 19

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 20

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Question 21

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 22

What is the Material Flammability Rating

Accepted Answer

A flammability classification for the insulating or housing material of a component, indicating its resistance to ignition and flame propagation when exposed to a standardized ignition source. Common rating systems include UL 94 (e.g., V-0, V-1, HB) and I

Panduit Corp SE150P-LR8

T50F-C

CT-8

CT-20

HR2R-1/8

HR3N-3/16

HR4U-1/4

HR6R-3/8

HR8P-1/2

HR16R-1

HR8T-1/2