Name: LNK6764V IC OFFLINE SWITCH FLYBACK 12EDIP
Brand: Power Integrations
SKU: LNK6764V
Price: 0.624 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Topology

Accepted Answer

Topology refers to the pattern of physical or logical connections and arrangements among the components (e.g., components, nodes, devices) within a system. It defines the flow paths for signals, data, or power and forms the skeletal framework of the syste

Question 6

What is the Voltage - Supply (Vcc/Vdd)

Accepted Answer

Voltage - Supply (Vcc/Vdd) The supply voltage is the nominal DC input that powers a digital or analog integrated circuit and defines its logic levels; its allowable range (unit: V DC) is central to device selection and power rail design.

Question 7

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 8

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 9

What is the Fault Protection

Accepted Answer

A set of integrated hardware and software mechanisms designed to detect, respond to, and mitigate abnormal operating conditions that could damage a system or its components. Core functions include overcurrent, overvoltage, undervoltage, and overtemperatur

Question 10

What is the Control Features

Accepted Answer

These are the configurable parameters or dedicated hardware/software interfaces that enable an operator or system to adjust, command, or monitor a device's operational state. They include inputs for enabling/disabling functions, setting thresholds (e.g.,

Question 11

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 12

What is the Power (Watts)

Accepted Answer

It quantifies the rate of energy transfer or conversion within an electrical system, measured in Joules per second. This fundamental parameter defines the capacity of a source to deliver energy or the amount consumed by a load. In component specifications

Question 13

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 14

What is the Duty Cycle

Accepted Answer

It specifies the percentage of time a periodic signal or device is in its active or "on" state relative to its total period. For digital signals, it is calculated as (Pulse Width / Period) * 100%. This parameter is critical for controlling average power d

Question 15

What is the Frequency - Switching

Accepted Answer

This parameter specifies the rate at which a power converter's internal control circuit operates, typically measured in kilohertz (kHz) or megahertz (MHz). It determines the speed of the fundamental switching cycle for transistors or regulators, directly

Question 16

What is the Internal Switch(s)

Accepted Answer

These are semiconductor transistors (typically MOSFETs) integrated within a power management IC to perform the core switching function in a converter topology (e.g., buck, boost). Their on-resistance (Rds(on)) and current rating directly determine the con

Question 17

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 18

What is the Voltage - Breakdown

Accepted Answer

This parameter specifies the maximum reverse-bias voltage that can be applied across a component's terminals before its insulating or blocking region undergoes a non-reversible, destructive failure, resulting in a sharp increase in current. It is a critic

Question 19

What is the Output Isolation

Accepted Answer

It refers to the electrical separation between a device's output terminals and its input power source or control circuitry. This is typically achieved using transformers, optocouplers, or capacitive coupling to block DC and hazardous AC voltages while all

Power Integrations LNK6764V

LT1103CT7

UC2825BDW

UCC3810N

UC3865N

UCC3580D-4

UCC3580N-2

UCC3580N-4

UCC2807N-2

UCC2580D-2

UCC2580D-4