Name: CC7-B-100-P CABLE CLIPS 7MM BLACK 100PACK
Brand: QualGear
SKU: CC7-B-100-P
Price: 6.36 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Screw Size

Accepted Answer

Screw Size refers to the key geometric parameters of a standardized screw that ensure interchangeability and assembly function, primarily including nominal diameter, pitch (or threads per inch), and nominal length, with base units of millimeters (mm) or i

Question 6

What is the Bundle Center to Mounting Center

Accepted Answer

This dimension specifies the linear distance between the centerline of a wire bundle or cable harness and the center point of its designated mounting feature (e.g., a clip, clamp, or tie-down point). It is a critical mechanical layout parameter for ensuri

Question 7

What is the Material Thickness

Accepted Answer

This parameter specifies the vertical dimension of a raw material sheet, layer, or component body, typically measured in millimeters (mm) or mils. It is a fundamental mechanical property that directly influences the component's structural rigidity, therma

Question 8

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 9

What is the Type Attributes

Accepted Answer

A set of descriptive characteristics that categorize a component by its fundamental operational principle, physical construction, or primary application domain. These attributes, such as "Ceramic Capacitor," "MOSFET," or "Digital Isolator," form the highe

Question 10

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 11

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 12

What is the Panel Hole Size

Accepted Answer

This parameter specifies the dimensions of the aperture cut into an enclosure or chassis panel to accommodate a component, such as a connector, switch, or meter. It is typically defined by a diameter for circular holes or length and width for rectangular

Question 13

What is the Height

Accepted Answer

Height refers to the vertical dimension of a component, measured perpendicularly from its mounting or reference plane to its highest point. This critical mechanical parameter determines the component's spatial footprint and influences clearance, stacking

Question 14

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 15

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 16

What is the Adhesive

Accepted Answer

A substance used to create a permanent or semi-permanent bond between surfaces, providing mechanical attachment, sealing, or thermal/electrical conduction. In electronics, it secures components, manages heat transfer via thermally conductive fillers, or p

Question 17

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 18

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Question 19

What is the Panel Thickness

Accepted Answer

This parameter specifies the thickness of the panel or chassis into which a component (e.g., a connector, switch, or meter) is designed to be mounted. It defines the allowable range of material thickness, typically measured in millimeters (mm) or inches (

Question 20

What is the Opening Size

Accepted Answer

This parameter specifies the dimensions of the aperture or cutout in a panel, chassis, or enclosure required to mount a component, such as a connector, switch, or display. It is typically defined by a length and width (for rectangular openings) or a diame

Question 21

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 22

What is the Material Flammability Rating

Accepted Answer

A flammability classification for the insulating or housing material of a component, indicating its resistance to ignition and flame propagation when exposed to a standardized ignition source. Common rating systems include UL 94 (e.g., V-0, V-1, HB) and I

QualGear CC7-B-100-P

AKKL-4756A-19

KLB-450A-RT

7626

7629

AKKL-5775A-RT

TL-600

TL-1375

WCK-720-01A-RT

N-4

N-8