Name: QTH-060-02-H-D-A-FL 0.50 MM Q STRIP HIGH-SPEED GROUN
Brand: Samtec Inc.
SKU: QTH-060-02-H-D-A-FL
Price: 23.704 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Mated Stacking Heights

Accepted Answer

Mated Stacking Heights refers to the total vertical height from the bottom mounting surface (e.g., PCB) to the topmost point of two or more mated board-to-board or wire-to-board connectors.

Question 5

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 6

What is the Number of Rows

Accepted Answer

It specifies the count of parallel contact or pin arrays in a connector, switch, or IC package, directly determining the total pin count when multiplied by the number of columns. This dimension is critical for defining the component's footprint, mating in

Question 7

What is the Connector Type

Accepted Answer

A standardized classification for electrical interfaces based on their mechanical form, mating mechanism, and electrical characteristics. It defines the physical and electrical compatibility between mated pairs, ensuring reliable signal and power transmis

Question 8

What is the Contact Finish

Accepted Answer

A conductive surface treatment applied to the electrical contact areas of connectors, switches, or relay terminals. Its primary functions are to protect the base metal from oxidation and corrosion, reduce contact resistance, and enhance solderability and

Question 9

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 10

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 11

What is the Height Above Board

Accepted Answer

This dimension specifies the vertical clearance between the bottom of a component's package (or its mounting surface) and the top of the printed circuit board after installation. It is a critical mechanical parameter for ensuring adequate space for airflo

Question 12

What is the Contact Finish Thickness

Accepted Answer

This parameter specifies the vertical dimension of the metallic plating layer applied to the electrical contact surfaces of a connector, switch, or relay terminal. Measured in micrometers (µm) or microinches (µ-in), it is a critical determinant of the con

Question 13

What is the Number of Positions

Accepted Answer

It specifies the total count of individual, electrically distinct connection points or terminals available within a single connector, switch, relay, or terminal block. This fundamental parameter defines the component's capacity for establishing independen

Question 14

What is the Pitch

Accepted Answer

The nominal center-to-center distance between adjacent pins, pads, or contacts on a component, connector, or across a PCB. Measured in millimeters or inches, it is a fundamental dimensional parameter that dictates component footprint, PCB trace routing de

Samtec Inc. QTH-060-02-H-D-A-FL

DF9B-31S-1V(20)

DF9-41S-1V(20)

DF9-13S-1V(20)

DF9-21S-1V(20)

DF9-15P-1V(20)

DF9-23P-1V(20)

DF9-51P-1V(54)

FX4C3-80P-1.27DSA

177983-1

FX8-100P-SV