Name: SI7021-A20-IMR SENS HUMID/TEMP 3.6V I2C 3% 6DFN
Brand: Silicon Labs
SKU: SI7021-A20-IMR
Price: 6.912 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 7

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 8

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Accuracy

Accepted Answer

Accuracy quantifies the maximum permissible deviation between a measured or processed value and its true or reference value, typically expressed as a percentage of full scale, a direct value (e.g., ±mV), or in parts per million (ppm). It is a fundamental

Question 11

What is the Response Time

Accepted Answer

This parameter specifies the time interval between a defined change in the input stimulus and the corresponding, stabilized change in the output signal of a sensor, circuit, or system. It is a critical dynamic performance metric, typically measured in mil

Question 12

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 13

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 14

What is the Sensor Type

Accepted Answer

Sensor Type categorizes a device based on its core physical transduction principle, which defines the specific physical quantity (e.g., temperature, pressure, light, magnetic field) it converts into a measurable electrical signal. This classification is f

Question 15

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 16

What is the Humidity Range

Accepted Answer

This parameter specifies the minimum and maximum relative humidity levels, typically expressed as a percentage (%), within which a sensor or device is guaranteed to operate correctly and maintain its specified accuracy. It defines the environmental operat

Question 17

What is the Sensitivity

Accepted Answer

Sensitivity quantifies the magnitude of a device's output signal change in response to a given change in the measured input quantity. It is a key transfer function parameter, typically expressed in units like mV/V for sensors, µV/Pa for microphones, or V/

Question 18

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 19

What is the Output

Accepted Answer

This parameter specifies the electrical signal or power delivered by a component, circuit, or system to its external load or subsequent stage. It defines the essential result of the device's operation, characterized by metrics such as voltage, current, po

Silicon Labs SI7021-A20-IMR

2322 691 90001

HTM1505

HPP805A031

CRH100A032A01

CHS-UPS

HCH-1000-002

CHIPCAP-L-50-TUBE

HIH-4030-003

DLP-TH1B

HPP815G537