Name: ST-01CL BUZZER MAGNETIC 11X14MM SMD
Brand: Soberton Inc.
SKU: ST-01CL
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Driver Circuitry

Accepted Answer

Driver Circuitry refers to electronic circuits specifically designed to control or deliver power to a load (e.g., motor, LED).

Question 6

What is the Frequency

Accepted Answer

Frequency is the number of occurrences of a repeating event per unit of time, with the base unit of Hertz (Hz).

Question 7

What is the Height - Seated (Max)

Accepted Answer

This parameter specifies the maximum vertical dimension from the mounting surface (e.g., PCB) to the highest point of a component when it is fully seated and soldered in place. It is a critical mechanical clearance specification for determining the minimu

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 10

What is the Sound Pressure Level (SPL)

Accepted Answer

A logarithmic measure of the effective pressure of a sound wave relative to a reference value (typically 20 µPa), expressed in decibels (dB). It quantifies the acoustic output intensity of components like speakers, buzzers, and microphones. For transducer

Question 11

What is the Duration

Accepted Answer

This parameter specifies the length of time a signal, state, or event persists, typically measured in seconds (s), milliseconds (ms), or microseconds (µs). It is a fundamental temporal characteristic used to define pulse widths, timing intervals, delay pe

Question 12

What is the Current - Supply

Accepted Answer

Slew Rate is the maximum rate of change of the amplifier's output voltage, typically measured in volts per microsecond (V/µs). It limits how fast the output can respond to a large, fast-changing input signal and is critical for large-signal and high-frequ

Question 13

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 14

What is the Input Type

Accepted Answer

This parameter specifies the nature of the electrical signal or physical quantity that a device's input circuitry is designed to accept and process. It defines the fundamental interface requirement, such as analog voltage, analog current, digital logic le

Question 15

What is the Operating Mode

Accepted Answer

This parameter defines the specific state or configuration in which a device or circuit actively performs its intended function. It determines the fundamental behavior of the component, such as amplification, switching, regulation, or signal conversion, a

Question 16

What is the Voltage Range

Accepted Answer

Specifies the minimum and maximum electrical potential difference, measured in volts (V), that can be safely and reliably applied to a component's input or across its terminals. This defines the operational boundaries for power supply rails, signal inputs

Question 17

What is the Technology

Accepted Answer

This parameter specifies the fundamental physical principle, manufacturing process, or architectural approach that defines a component's core operation and construction. It determines key performance boundaries, such as speed, power efficiency, integratio

Question 18

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 19

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 20

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 21

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 22

What is the Ratings

Accepted Answer

Ratings specify the absolute maximum and recommended operating limits for electrical, thermal, and environmental conditions, such as voltage, current, power, and temperature. These parameters define the safe operational boundaries and long-term reliabilit

Question 23

What is the Port Location

Accepted Answer

Port Location specifies the physical position of a connector or interface on a device's enclosure, such as front, rear, side, top, or bottom. This parameter is critical for system integration, defining cable routing paths, accessibility for user interacti

Soberton Inc. ST-01CL

EFB-RL20C102

EFB-RM38C123

EFB-AA40D102

EFB-AA14D001

EFB-RC24C41

63S1120

CEP-2202AS

CEP-2280

CEP-4411AC

CEP-1160