Name: MP45DT02TR-M MIC MEMS DIGITAL PDM OMNI -26DB
Brand: STMicroelectronics
SKU: MP45DT02TR-M
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 7

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Voltage - Rated

Accepted Answer

This parameter specifies the maximum continuous operating potential difference, either AC or DC, that a component, device, or insulating material is designed to withstand without risk of dielectric breakdown, performance degradation, or safety hazard. It

Question 10

What is the Current - Supply

Accepted Answer

This parameter specifies the continuous direct current drawn by a device from its power supply pin(s) to maintain normal operation under specified conditions. It is a key specification for power budget calculation, thermal design, and selecting appropriat

Question 11

What is the Voltage Range

Accepted Answer

Specifies the span of electrical potential, from minimum to maximum, that a component or system can safely and reliably accept as input or produce as output, measured in volts (V). This parameter defines the operational boundaries for power supplies, sens

Question 12

What is the Frequency Range

Accepted Answer

Frequency Range specifies the continuous spectrum of periodic signal frequencies, measured in Hertz (Hz), over which a component, device, or system is designed to operate effectively. It defines the lower and upper frequency limits (e.g., 20 Hz to 20 kHz)

Question 13

What is the S/N Ratio

Accepted Answer

Signal-to-Noise Ratio (S/N Ratio) quantifies the quality of a signal by comparing the level of the desired signal to the level of background noise, expressed in decibels (dB). A higher ratio indicates a cleaner, more discernible signal, which is critical

Question 14

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 15

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 16

What is the Sensitivity

Accepted Answer

Sensitivity quantifies the magnitude of a device's output signal change in response to a given change in the measured input quantity. It is a key transfer function parameter, typically expressed in units like mV/V for sensors, µV/Pa for microphones, or V/

Question 17

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 18

What is the Direction

Accepted Answer

It defines the spatial orientation of a component's key feature, such as its mounting plane, pin arrangement, or signal flow, relative to a defined reference (e.g., a PCB edge or chassis). This parameter is critical for mechanical integration, ensuring pr

Question 19

What is the Port Location

Accepted Answer

Port Location specifies the physical position of a connector or interface on a device's enclosure, such as front, rear, side, top, or bottom. This parameter is critical for system integration, defining cable routing paths, accessibility for user interacti

Question 20

What is the Height (Max)

Accepted Answer

This parameter specifies the maximum allowable vertical dimension of a component's package, measured from its seating plane or mounting surface to its highest point. It is a critical mechanical constraint for determining the minimum required clearance wit

Question 21

What is the Shape

Accepted Answer

The physical form or outline of a component's package, which dictates its mechanical fit, mounting compatibility, and spatial footprint on a PCB. It is a primary identifier (e.g., cylindrical, rectangular, radial, axial) that determines handling, assembly

STMicroelectronics MP45DT02TR-M

WM-54BT

WM-60AY

WM-65A103

WM-52BM

WM-64K

WM-61B102B

BJ-21590-000

EA-21842

EK-23133

MD6022ASC-0