Name: HHM1520A2 BALUN 2.3GHZ-2.5GHZ 50/100 0805
Brand: TDK Corporation
SKU: HHM1520A2
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 5

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 6

What is the Frequency Range

Accepted Answer

The span of electromagnetic frequencies over which a component, device, or system is designed to operate effectively, typically specified by its lower and upper limits in Hertz (Hz). This parameter defines the usable bandwidth for signal transmission, rec

Question 7

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 8

What is the Impedance - Unbalanced/Balanced

Accepted Answer

This parameter specifies whether a component's input or output port is designed for an unbalanced (single-ended) or balanced (differential) signal interface. An unbalanced port uses a single signal conductor referenced to a common ground, while a balanced

Question 9

What is the Insertion Loss (Max)

Accepted Answer

It quantifies the maximum signal power reduction, typically expressed in decibels (dB), as a signal passes through a passive component like a connector, cable, or filter. This inherent loss, caused by impedance mismatch, conductor resistance, and dielectr

Question 10

What is the Return Loss (Min)

Accepted Answer

The minimum acceptable value of the ratio of incident power to reflected power at a specific frequency, expressed in positive decibels (dB). This specification defines the worst-case impedance matching performance of a component or transmission line, ensu

Question 11

What is the Phase Difference

Accepted Answer

A measure of the angular displacement between two periodic signals of the same frequency, typically expressed in degrees or radians. It quantifies the temporal shift between waveforms, such as voltage and current in AC circuits, and is critical for analyz

TDK Corporation HHM1520A2

EHF-FD1624

EHF-1BD1800

EHF-2BD1800

EHF-2BE1800

EHF-2BG1800

EHF-FD1755T

HHM1562B

HHM1520

EHF-4BE5250

EHF-FD1622