Name: SCAP,PBLL-11.0/5.4 CAP 11F -10% +20% 5.4V UCAP PACK
Brand: Tecate Group
SKU: SCAP,PBLL-11.0/5.4
Price: 8.712 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Height - Seated (Max)

Accepted Answer

This parameter specifies the maximum vertical dimension from the mounting surface (e.g., PCB) to the highest point of a component when it is fully seated and soldered in place. It is a critical mechanical clearance specification for determining the minimu

Question 5

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 6

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 7

What is the Capacitance

Accepted Answer

A measure of a component's ability to store electrical charge, defined as the ratio of stored charge (Q) to applied voltage (V), with the base unit of the Farad (F). It is a fundamental property of capacitors, which are used for energy storage, filtering,

Question 8

What is the Voltage - Rated

Accepted Answer

This parameter specifies the maximum continuous operating potential difference, either AC or DC, that a component, device, or insulating material is designed to withstand without risk of dielectric breakdown, performance degradation, or safety hazard. It

Question 9

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 10

What is the Tolerance

Accepted Answer

Tolerance specifies the permissible deviation from a component's nominal value, expressed as a percentage or absolute unit. It defines the manufacturing precision and directly impacts circuit performance, stability, and yield. Tight tolerances are critica

Question 11

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 12

What is the Lead Spacing

Accepted Answer

This parameter defines the center-to-center distance between adjacent component leads or terminals, typically measured in millimeters (mm) or inches (in). It is a critical mechanical dimension that determines the component's footprint on a PCB and must ma

Question 13

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 14

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 15

What is the ESR (Equivalent Series Resistance)

Accepted Answer

A measure of the total effective series resistance within a capacitor, primarily contributed by its dielectric losses, electrode resistance, and terminal leads. It is a critical loss parameter, expressed in milliohms (mΩ) or ohms (Ω), that directly impact

Question 16

What is the Lifetime @ Temp.

Accepted Answer

This parameter specifies the expected operational duration, typically in hours, that a component (such as an electrolytic capacitor or LED) can maintain its specified performance when continuously operated at a declared ambient temperature. It is a key re

Tecate Group SCAP,PBLL-11.0/5.4

EEC-F5R5H684

EEC-A0EL106

EEC-S5R5H105

EEC-F5R5H473

EEC-S0HD104V

EEC-S0HD224H

EEC-S0HD334H

EEC-S5R5V155

EEC-EN0F204A

B0510-2R5224