Name: T3PS43203P PWR SPLY 4O 0-32V/0-3A, 0-5V/0-1
Brand: Teledyne LeCroy
SKU: T3PS43203P
Price: 0.8 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Current - Output

Accepted Answer

Current - Output refers to the continuous or instantaneous current value that a circuit, device, or component (e.g., power supply, amplifier, driver IC) can source or sink at its output port, with the base unit of Amperes (A).

Question 6

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 7

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 8

What is the Number of Outputs

Accepted Answer

This parameter specifies the total count of independent signal or power delivery channels available from a component, such as a power supply, amplifier, or logic device. It is a fundamental capacity metric that defines how many distinct loads or subsequen

Question 9

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 10

What is the Power (Watts)

Accepted Answer

This parameter quantifies the rate of energy transfer or conversion within an electronic component or system, measured in Watts (W). It defines the maximum continuous power a device can safely dissipate as heat or deliver to a load, serving as the primary

Question 11

What is the Display Type

Accepted Answer

This parameter classifies a visual output device based on its core imaging technology and construction, such as LCD, OLED, LED segment, or VFD. It defines the fundamental method of light modulation or emission, which determines key performance characteris

Question 12

What is the Ripple

Accepted Answer

Ripple refers to the small, periodic, and typically unwanted AC voltage or current component superimposed on a DC output, often resulting from incomplete filtering in power supplies or switching circuits. It is quantified as a peak-to-peak or RMS value, m

Question 13

What is the Size / Dimension

Accepted Answer

This parameter specifies the physical measurements of a component, typically expressed as length, width, height, and/or diameter in millimeters or inches. It defines the component's spatial footprint, which is critical for mechanical integration, PCB layo

Question 14

What is the Voltage - Output

Accepted Answer

This parameter specifies the nominal DC potential difference provided by a power supply, regulator, or signal source at its output terminals under defined load conditions, measured in volts (V). It is the primary electrical characteristic defining the lev

Question 15

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 16

What is the Number of Characters

Accepted Answer

This parameter specifies the total quantity of individual alphanumeric or symbolic units that a display module or component can present simultaneously. It defines the information density and is a primary specification for selecting devices like segmented

Question 17

What is the Voltage Regulation - Load

Accepted Answer

It measures a power supply or regulator's ability to maintain a stable output voltage when its load current changes from a minimum to a maximum specified value. This parameter is typically expressed as a percentage of the nominal output voltage or as an a

Question 18

What is the Voltage Regulation - Line

Accepted Answer

This parameter quantifies a power supply or regulator's ability to maintain a stable DC output voltage despite variations in its input voltage. It is expressed as the percentage change in output voltage relative to the nominal output for a specified chang

Question 19

What is the Current Regulation - Load

Accepted Answer

It specifies the ability of a power supply or current source to maintain a stable output current despite variations in the load impedance. This parameter, typically expressed as a percentage of the nominal output current or in absolute milliamperes (mA),

Question 20

What is the Current Regulation - Line

Accepted Answer

This parameter quantifies a power supply or regulator's ability to maintain a stable output current when its input voltage varies within a specified range. It is expressed as the change in output current relative to the nominal value, typically as a perce

Question 21

What is the Accuracy - Voltmeter; Ammeter

Accepted Answer

This parameter specifies the maximum permissible error, expressed as a percentage of full-scale reading or reading value, for voltage and current measurement instruments. It quantifies the deviation between the instrument's indicated value and the true va

Teledyne LeCroy T3PS43203P

LLS-9120

1651A

1786A

1710A

1735A

1760A

1682A

1667

1786B

9121