Name: OPA2320AQDGKRQ1 IC CMOS 2 CIRCUIT 8VSSOP
Brand: Texas Instruments
SKU: OPA2320AQDGKRQ1
Price: 3.056 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 5

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 6

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 7

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 8

What is the Amplifier Type

Accepted Answer

Amplifier Type categorizes the operational amplifier based on its primary design optimization, such as General Purpose, Precision, Low-Noise, High-Speed, or Low-Power, indicating its intended application area.

Question 9

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 10

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 11

What is the Number of Circuits

Accepted Answer

This specifies the quantity of independent functional amplifier circuits contained within a single integrated circuit (IC) package.

Question 12

What is the Current - Output / Channel

Accepted Answer

This parameter specifies the maximum continuous current that a single, independent output channel within a multi-channel device (e.g., a multi-phase regulator, LED driver array, or multi-port USB controller) can safely source or sink. It defines the per-c

Question 13

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 14

What is the Voltage - Supply Span (Min)

Accepted Answer

This is the minimum total voltage difference required between the positive (V+) and negative (V-) power supply pins for the amplifier to operate correctly and meet its specified performance parameters.

Question 15

What is the Voltage - Supply Span (Max)

Accepted Answer

This parameter defines the absolute maximum voltage difference that can be applied between the positive and negative power supply pins of an operational amplifier or other differential-supply component. Exceeding this rating can cause immediate or latent

Question 16

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 17

What is the Current - Supply

Accepted Answer

Slew Rate is the maximum rate of change of the amplifier's output voltage, typically measured in volts per microsecond (V/µs). It limits how fast the output can respond to a large, fast-changing input signal and is critical for large-signal and high-frequ

Question 18

What is the Slew Rate

Accepted Answer

Slew Rate specifies the maximum rate of change of an amplifier's output voltage, typically measured in volts per microsecond (V/µs). It defines the fastest possible output transition for a large-signal step input, fundamentally limiting the amplifier's ab

Question 19

What is the Gain Bandwidth Product

Accepted Answer

Gain Bandwidth Product (GBWP or GBW) is a constant for a given amplifier. It is the product of the amplifier's open-loop gain and the frequency at which that gain is measured. It provides an estimate of the useful bandwidth available for a given closed-lo

Question 20

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Question 21

What is the Current - Input Bias

Accepted Answer

Input Bias Current is the small DC current required by each of the amplifier's input terminals (inverting and non-inverting) to bias the internal transistors. The difference between these two currents is the Input Offset Current.

Question 22

What is the Voltage - Input Offset

Accepted Answer

Input Offset Voltage is the small DC voltage that must be applied between the amplifier's two input terminals to force the output voltage to precisely zero when no external input signal is present. It is a key measure of DC precision.

Texas Instruments OPA2320AQDGKRQ1

LT1213CS8

LT1357CN8

LT1014DSW

LT1215CS8

LPC662AIM/NOPB

CA3140E

OP90GS

ICL7650SCPA-1

LM358AN/NOPB

LMC6682AIN