Name: TLP266J(V4,E TRIAC COUPLER; ZC; VDE; SO6; BUL
Brand: Toshiba Semiconductor and Storage
SKU: TLP266J(V4,E
Price: 0.72 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Current - Hold (Ih)

Accepted Answer

Holding Current (Ih) refers to the minimum anode current (or coil current) required to maintain a bistable device (e.g., relay, thyristor, SCR) in its latched on state after it has been triggered. If the current falls below this value, the device will tur

Question 6

What is the Turn On Time

Accepted Answer

Turn-On Time refers to the time delay from the application of a drive signal (e.g., gate voltage) to the moment a semiconductor switching device (e.g., MOSFET, IGBT, thyristor) fully enters the conducting state (reaching a specified on-state current or vo

Question 7

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 8

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 9

What is the Zero Crossing Circuit

Accepted Answer

A circuit designed to detect the precise moment when an AC voltage waveform crosses the zero-volt reference point. Its primary function is to generate a timing signal or trigger event at each zero-crossing, enabling phase control for AC switches (like TRI

Question 10

What is the Static dV/dt (Min)

Accepted Answer

Specifies the minimum rate of rise of the anode-cathode voltage that will cause a thyristor or TRIAC to switch from the off-state to the on-state without a gate trigger signal. This critical rate-of-change parameter, measured in volts per microsecond (V/µ

Question 11

What is the Current - LED Trigger (Ift) (Max)

Accepted Answer

This parameter specifies the maximum forward current required to reliably initiate and sustain light emission from a Light Emitting Diode (LED) within an optocoupler or opto-isolator. It defines the threshold for the input-side LED to reach its specified

Question 12

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 13

What is the Number of Channels

Accepted Answer

This parameter specifies the total count of independent, parallel signal paths or data streams that a component (e.g., an amplifier, ADC, DAC, multiplexer, or communication IC) can process or handle simultaneously. It is a fundamental capacity metric that

Question 14

What is the Current - On State (It (RMS)) (Max)

Accepted Answer

This parameter specifies the maximum permissible continuous root-mean-square (RMS) forward current that a thyristor or similar power semiconductor can conduct while in its fully latched state. It is a critical thermal rating, measured in Amperes (A), that

Question 15

What is the Voltage - Off State

Accepted Answer

The maximum voltage that can be continuously applied across the main terminals of a semiconductor switching device (e.g., MOSFET, IGBT, thyristor) while it is in a non-conducting state, without causing breakdown or excessive leakage current. This blocking

Question 16

What is the Current - DC Forward (If) (Max)

Accepted Answer

This parameter specifies the maximum allowable continuous direct current that can flow through a semiconductor junction (e.g., in a diode or LED) in the forward-biased direction without causing thermal damage or performance degradation. It is a critical A

Question 17

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 18

What is the Voltage - Forward (Vf) (Typ)

Accepted Answer

This parameter specifies the typical forward voltage drop across a semiconductor junction (e.g., in a diode or LED) when conducting a specified test current. It is a key indicator of conduction loss and power efficiency, measured in volts (V). The value i

Question 19

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 20

What is the Voltage - Isolation

Accepted Answer

This specification defines the maximum potential difference that can be safely and continuously applied between two electrically isolated circuits within a single component, such as an optocoupler, transformer, or isolated power supply. It is a critical s

Question 21

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Toshiba Semiconductor and Storage TLP266J(V4,E

MOC3020

MOC3011

MOC3010

MOC3021

MOC3022.300

MCP3022.300

MOC3022

H11C1

H11C5

MOC3032M