Name: A102-02M TOSLINK CABLE PLUG-PLUG 2M
Brand: Tripp Lite
SKU: A102-02M
Price: 6.152 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Fiber Type

Accepted Answer

Fiber Type refers to the systematic classification of optical fibers based on core physical characteristics such as propagation mode, core/cladding material, and refractive index profile.

Question 5

What is the Return Loss

Accepted Answer

Return Loss is a parameter that quantifies the amount of signal reflection due to impedance mismatch at a transmission line or network port. It is defined as the decibel ratio of incident power to reflected power, a negative value typically expressed in p

Question 6

What is the Bend Radius

Accepted Answer

Bend Radius refers to the minimum radius of curvature to which a cable, harness, or flexible conduit can be bent during installation or use without causing structural damage, performance degradation, or significant reduction in service life. It is typical

Question 7

What is the Color - Cable

Accepted Answer

Cable Color refers to the visual appearance of a cable's outermost jacket, determined by specific dyes or colorants mixed into the jacket material during production.

Question 8

What is the Color - Connectors

Accepted Answer

Connector Color refers to the visual appearance of a connector's housing, latch, keying feature, or internal marking. Its core function is to provide quick identification, mating error prevention, status indication (e.g., powered, link active), or port ca

Question 9

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 10

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 11

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 12

What is the Cable Diameter

Accepted Answer

This parameter specifies the outer diameter of a cable assembly, including its insulation, shielding, and any protective jacketing. It is a critical mechanical dimension measured in millimeters (mm) or inches (in) that determines the cable's spatial footp

Question 13

What is the Cable Type

Accepted Answer

A classification based on a cable's core construction, electrical characteristics, and intended application. It defines the fundamental signal or power transmission medium, such as coaxial (RF), twisted pair (data/telecom), multi-conductor (control/power)

Question 14

What is the Insertion Loss

Accepted Answer

Insertion Loss quantifies the reduction in signal power that occurs when a component (e.g., connector, cable, filter) is inserted into a transmission line, measured in decibels (dB). It is a fundamental performance metric for passive RF/microwave and high

Question 15

What is the Length - Overall

Accepted Answer

This parameter specifies the maximum linear dimension of a component or assembly along its primary axis, measured from its outermost extremities. It is a critical mechanical specification for determining spatial requirements, enclosure fit, and clearance

Question 16

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 17

What is the Ratings

Accepted Answer

Ratings specify the absolute maximum and recommended operating limits for electrical, thermal, and environmental conditions, such as voltage, current, power, and temperature. These parameters define the safe operational boundaries and long-term reliabilit

Question 18

What is the 1st Connector

Accepted Answer

A primary electrical interface designed to establish the initial or most critical connection point for power, data, or signal transfer within a system. It often defines the main system interface standard (e.g., USB, D-Sub, power inlet) and dictates the ma

Question 19

What is the 2nd Connector

Accepted Answer

A secondary or auxiliary electrical interface on a device, providing additional connectivity for signals, power, or data. It expands the system's I/O capacity, enables modular expansion, or supports specific functions like programming, debugging, or daisy

Question 20

What is the Jacket (Insulation) Material

Accepted Answer

This specification defines the primary polymer or compound used for the outermost protective and insulating layer of a wire or cable. The chosen material directly determines key performance characteristics such as voltage rating, flexibility, resistance t

Tripp Lite A102-02M

503994-1

504958-3

504970-2

504972-1

492015-4

501833-3

502796-2

504969-5

1278032-5

0739391002