Name: MS6N-LFR-1/2-D6-CRV-AS FILTER REGULATOR
Brand: Festo Corporation
SKU: MS6N-LFR-1/2-D6-CRV-AS
Price: 141.656 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Connection Method

Accepted Answer

Connection Method refers to the specific physical means and structure used to achieve a permanent or separable joint between two or more electrical/mechanical components. Its core purpose is to establish a reliable path for electrical signal transmission,

Question 5

What is the Operating Pressure

Accepted Answer

This parameter specifies the range of fluid pressure, typically measured in Pascals (Pa), bar, or PSI, within which a pneumatic or hydraulic component (e.g., valve, sensor, actuator) is designed to function correctly and meet its performance specification

Question 6

What is the Flow Rate

Accepted Answer

This parameter quantifies the volume or mass of a fluid (liquid or gas) passing through a sensor, valve, or system per unit of time. It is a critical performance metric for components like flow meters, pumps, and cooling systems, defining their capacity a

Question 7

What is the Fluid Type

Accepted Answer

Refers to the specific liquid or gas medium that a component, such as a sensor, valve, or pump, is designed to operate with or measure. This specification is critical for ensuring material compatibility, preventing corrosion or degradation, and guaranteei

Question 8

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 9

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 10

What is the Pressure Regulation

Accepted Answer

A mechanism or circuit designed to maintain a constant output pressure from a variable input or load, typically using a feedback loop with a sensor, controller, and an active element like a valve or pump. It is critical in pneumatic and hydraulic systems

Question 11

What is the Filtration Level

Accepted Answer

This parameter specifies the effectiveness of a filter in removing particulate contaminants from a fluid (liquid or gas), typically defined by a standardized rating system such as micron rating (e.g., 10 µm), Beta ratio (β), or industry classifications li

Question 12

What is the Flow Direction

Accepted Answer

This parameter specifies the intended path of fluid movement through a component, such as a valve, pump, or sensor. It defines the inlet and outlet ports, ensuring correct installation for proper function, efficiency, and safety. The direction is often in

Question 13

What is the Drain Type

Accepted Answer

This parameter classifies a power MOSFET based on its internal channel structure and the polarity of the gate voltage required to induce conduction. The two primary categories are **Enhancement-mode** (normally-off, requiring a positive Vgs for N-channel)

Question 14

What is the Condensation Capacity

Accepted Answer

This parameter quantifies the maximum amount of water vapor a dehumidification component or system can remove from the air per unit of time, typically expressed in liters per day (L/D) or pints per day (P/D) under standard test conditions. It is a core pe

Question 15

What is the Oil Capacity

Accepted Answer

The maximum volume of lubricating fluid a mechanical component (e.g., a gearbox or hydraulic reservoir) is designed to hold for proper operation. This specification, typically measured in liters (L) or milliliters (mL), is critical for ensuring adequate l

Question 16

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 17

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Festo Corporation MS6N-LFR-1/2-D6-CRV-AS

MS6-LFR-1/2-D7-CRM-AS

MS4N-LF-1/4-ERM

MS4N-LFR-1/4-D6-CRV-AS

MS4-LFR-1/4-D6-CRV-AS

MS4-LFR-1/4-D7-CRV-AS

MS6N-LFR-1/2-D7-CUM-AS

MS6-LFM-1/2-BUV

MS2-LR-M5-D6-AR-BAR-B

MS6N-LFR-1/2-D6-CRV-AS

MS4-LFR-1/4-D7-CRM-AS