Name: 3Z4S-LT MDRL-CR35 DIRECT RING LED RED 70MM
Brand: Omron Automation and Safety
SKU: 3Z4S-LT MDRL-CR35
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Outer Diameter

Accepted Answer

Outer Diameter specifies the maximum external width of a cylindrical or near-cylindrical component, such as a cable, connector, capacitor, or inductor body. It is a critical mechanical dimension, measured in millimeters (mm) or inches (in), that determine

Question 5

What is the Inner Diameter

Accepted Answer

It specifies the internal diameter of a hollow cylindrical component, such as a ferrule, sleeve, or protective tube, measured in millimeters (mm) or inches (in). This dimension is critical for determining the fit and clearance for internal elements like o

Question 6

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 7

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Length - Emitting Surface

Accepted Answer

This parameter defines the linear dimension of the area on a light-emitting component (e.g., LED, laser diode, or display segment) from which radiant flux is actively projected. It is a key geometric specification that determines the physical size of the

Question 10

What is the Width - Emitting Surface

Accepted Answer

This parameter specifies the lateral dimension of the area on a light-emitting component (e.g., LED, laser diode, or display pixel) from which optical radiation is actively generated and exits. It is a key geometric specification that directly influences

Question 11

What is the Outer Diameter - Emitting Surface

Accepted Answer

The physical dimension of the light-emitting area on the front face of an optical component, such as an LED or laser diode. This diameter, typically measured in millimeters (mm), defines the active area from which light is projected and is a critical para

Question 12

What is the Height

Accepted Answer

Height refers to the vertical dimension of a component, measured perpendicularly from its mounting or reference plane to its highest point. This critical mechanical parameter determines the component's spatial footprint and influences clearance, stacking

Question 13

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 14

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Omron Automation and Safety 3Z4S-LT MDRL-CR35

3Z4S-LE-MEBL-CB145

3Z4S-LT MBRL-CR7530

3Z4S-LT MDBL-CW180100

3Z4S-LT MDRL-CR35

3Z4S-LT MDRL-CW50

3Z4S-LT MEBL-CR50

3Z4S-LT MLRL-CR48

3Z4S-LT MSCL-CR39

3Z4S-LT-MBRL-CW5015

CCS-ADI-BL68-880-WD