Name: D4BL-2GRD-AT SWITCH SAFETY DPST-NC 6A 115V
Brand: Omron Automation and Safety
SKU: D4BL-2GRD-AT
Price: 602.208 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Base Product Number

Accepted Answer

By using the Base Product Number, manufacturers and customers can efficiently communicate about component families without detailing every specification, streamlining the procurement process.

Question 5

What is the Circuit

Accepted Answer

A circuit is a closed path formed by interconnected electrical components and conductors, used to transmit current, process signals, or distribute electrical energy.

Question 6

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 7

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 8

What is the Holding Force

Accepted Answer

The minimum axial tensile force required to initiate separation between mated connector halves or a component from its socket, typically measured in Newtons (N). This parameter quantifies the mechanical retention strength of the interface, ensuring reliab

Question 9

What is the Conduit Thread Size

Accepted Answer

This specification defines the standardized thread dimensions on the end of an electrical conduit or its fittings, ensuring a secure, mechanically robust, and often water-resistant connection to enclosures or other conduit sections. It is typically denote

Question 10

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 11

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 12

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 13

What is the Actuator Type

Accepted Answer

Actuator Type refers to the fundamental classification of a device that converts an input energy source into controlled mechanical motion. It is defined by its core operating principle, such as electric (solenoid, motor), pneumatic (cylinder), hydraulic (

Question 14

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 15

What is the Voltage Rating

Accepted Answer

The maximum sustained potential difference a component can withstand between its terminals without risk of insulation breakdown, performance degradation, or permanent damage. This absolute maximum rating, specified in volts (V) for either DC or AC (RMS) c

Question 16

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 17

What is the Current Rating (Amps)

Accepted Answer

Specifies the maximum continuous current a conductor, connector, or component can safely carry without exceeding its thermal limits, thereby preventing overheating and ensuring long-term reliability. This ampere (A) rating is a fundamental parameter for s

Question 18

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 19

What is the Must Operate

Accepted Answer

Must Operate specifies the minimum stimulus level (e.g., current, voltage, magnetic field, or physical displacement) that a relay, sensor, or switch is guaranteed to respond to and change its output state under all specified environmental and tolerance co

Question 20

What is the Must Release

Accepted Answer

This parameter specifies the minimum force that must be applied to disengage a latching or locking mechanism (e.g., on a connector, switch, or module) to ensure safe and reliable unmating. It is a critical mechanical specification that guarantees the conn

Omron Automation and Safety D4BL-2GRD-AT

D4NS-1AF

D4NS-3DF

D4BL-2CRA

D4BL-1CRB

D4BL-2CRA-A

D4BL-2GRD-AT

D4BL-3CRB

D4BL-3CRG OKUMA

D4BL-3DRB-A

D4BS-25FS