Name: FIS-0003-0219G BAR CODE READER CHASSIS MOUNT
Brand: Omron Automation and Safety
SKU: FIS-0003-0219G
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Light Source

Accepted Answer

A light source is an active component that converts electrical energy into electromagnetic radiation, primarily within the visible spectrum. Its core function is illumination, but it also serves critical roles in signaling, sensing, and optical communicat

Question 5

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 6

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 7

What is the Image Type

Accepted Answer

This parameter specifies the fundamental format and encoding of the visual data output by an imaging sensor or camera module. It defines the pixel structure (e.g., raw Bayer pattern, RGB, YUV) and bit depth, which directly determines the required processi

Question 8

What is the Visual Field (Max)

Accepted Answer

The maximum observable angular extent of a scene that an optical system, such as a camera lens or sensor, can capture in a single instant. It is a fundamental optical specification, typically measured in degrees (°) horizontally, that defines the coverage

Question 9

What is the Visual Field (Min)

Accepted Answer

The minimum observable angular extent of a scene that an optical system, such as a camera lens or sensor, can capture. This parameter defines the lower bound of the system's field-of-view capability, typically measured in degrees (°) or as a linear dimens

Question 10

What is the Installation Distance

Accepted Answer

The specified linear separation between a sensor's active face and the target object required for reliable operation. This critical mechanical parameter, measured in millimeters (mm), defines the optimal positioning to ensure accurate detection, measureme

Question 11

What is the Scan Rate

Accepted Answer

This parameter specifies the frequency at which a sensor or data acquisition system samples its input signal, typically measured in samples per second (SPS) or Hertz (Hz). It defines the temporal resolution and determines the maximum frequency component t

Question 12

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 13

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 14

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 15

What is the Sensor Type

Accepted Answer

Sensor Type categorizes a device based on its core physical transduction principle, which defines the specific physical quantity (e.g., temperature, pressure, light, magnetic field) it converts into a measurable electrical signal. This classification is f

Question 16

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 17

What is the Resolution

Accepted Answer

Resolution specifies the smallest distinguishable increment of a measured quantity that a sensor, converter, or display can reliably report. For analog-to-digital converters (ADCs), it is the bit depth (e.g., 12-bit) defining the number of discrete digita

Question 18

What is the Ingress Protection

Accepted Answer

A standardized rating system (IEC 60529) that classifies the degree of protection provided by an enclosure against the intrusion of solid objects (first digit) and liquids (second digit). It quantifies resistance to dust, accidental contact, and water ing

Question 19

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Omron Automation and Safety FIS-0003-0219G

BCR5242-BR

FIS-0002-0001G

FIS-0003-0191G

FIS-0003-0219G

FIS-0830-0004G

FIS-0830-1003G

FIS-0870-1001G

V500-R521B2

V400-F050

V400-H211