Name: 2814867 SIGNAL MULTIPLIER 4-WAY SPLITTER
Brand: Phoenix Contact
SKU: 2814867
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Isolation

Accepted Answer

Isolation refers to the establishment of a high-impedance barrier between two or more circuits within an electrical system, designed to prevent the direct flow of DC and hazardous AC currents, while allowing signals or power to cross in a controlled manne

Question 5

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 6

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 7

What is the Output Range

Accepted Answer

This parameter defines the span of possible output values (e.g., voltage, current, digital code) that a device or component can generate under specified operating conditions. It is a fundamental specification that determines the component's compatibility

Question 8

What is the Input Range (Current, Voltage)

Accepted Answer

Specifies the minimum and maximum values of current and/or voltage that can be safely and reliably applied to a device's input terminals without causing damage or performance degradation. This defines the operational boundaries for the input signal or pow

Question 9

What is the Input Range (Additional)

Accepted Answer

This parameter specifies the allowable voltage or current levels that can be applied to an auxiliary or secondary input port on a device, such as a reference, enable, or sense pin. It defines the safe operating boundaries for these supplementary signals,

Question 10

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 11

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 12

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 13

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 14

What is the Input Type

Accepted Answer

This parameter specifies the nature of the electrical signal or physical quantity that a device's input circuitry is designed to accept and process. It defines the fundamental interface requirement, such as analog voltage, analog current, digital logic le

Question 15

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 16

What is the Mounting Type

Accepted Answer

Mounting Type refers to the standardized classification of the method by which an electronic component or module is physically secured and electrically connected to a printed circuit board, chassis, or panel. It defines how the component integrates into t

Phoenix Contact 2814867

2810939

2814045

2814498

2814553

2814469

2814867

2864419

2813541

2864163

2864697