Name: 19158 BAG STATIC SHIELD METAL IN 5"X8"
Brand: SCS
SKU: 19158
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Thickness

Accepted Answer

Thickness is a fundamental linear dimension specifying the distance between two parallel surfaces of a component or material, typically measured in millimeters (mm) or inches (in). It is a critical mechanical parameter that directly influences structural

Question 5

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 6

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 7

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 8

What is the Tensile Strength

Accepted Answer

Tensile Strength is the maximum axial stress a material or component can withstand before fracturing under uniaxial tensile load, measured in units of pressure such as Pascals (Pa) or pounds per square inch (psi). It is a fundamental mechanical property t

Question 9

What is the Closure System

Accepted Answer

A closure system is the mechanical assembly designed to securely fasten and seal a connector's housing halves or a component's protective cover. Its primary function is to ensure environmental sealing (IP rating), maintain electrical continuity, and provi

Question 10

What is the Metal Layer

Accepted Answer

The conductive copper foil laminated onto a dielectric substrate to form the electrical pathways of a printed circuit board. Its thickness, typically specified in ounces per square foot (e.g., 1 oz, 2 oz) or micrometers (µm), directly determines current-c

Question 11

What is the Static Discharge Shielding

Accepted Answer

A conductive barrier integrated into a cable or connector assembly designed to divert electrostatic discharge (ESD) energy away from internal signal conductors. Its primary function is to protect sensitive electronic components from transient voltage spik

Question 12

What is the Length - Inside

Accepted Answer

This dimension specifies the internal, clear axial distance between two opposing interior surfaces of a hollow component, such as a housing, sleeve, or enclosure. It defines the maximum available space for accommodating internal parts, assemblies, or wiri

Question 13

What is the Width - Inside

Accepted Answer

This dimension specifies the clear internal span between two opposing interior walls or surfaces of an enclosure, housing, or component body. It defines the maximum allowable width for any internal assembly, such as a PCB, heatsink, or module, that must f

SCS 19158

190812

19158

1911216

13020

13494

13873

13880

13884

1704 54X150

1706 36X150