Name: 2000314 TRANSDUCER 25# PRES 1-5V
Brand: TE Connectivity Measurement Specialties
SKU: 2000314
Price: 40.00 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Supplier Device Package

Accepted Answer

Supplier Device Package refers to the specific nomenclature or code used by a component manufacturer or distributor (supplier) to designate the physical outline and pin arrangement of an electronic component they produce or sell.

Question 4

What is the Operating Pressure

Accepted Answer

This parameter specifies the range of fluid pressure, typically measured in Pascals (Pa), bar, or PSI, within which a pneumatic or hydraulic component (e.g., valve, sensor, actuator) is designed to function correctly and meet its performance specification

Question 5

What is the Package / Case

Accepted Answer

Package / Case refers to the protective housing that encases an electronic component, providing mechanical support, electrical connections, and thermal management.

Question 6

What is the Port Style

Accepted Answer

This parameter defines the physical form and interface standard of a communication or power port on a device, such as RJ45, USB Type-C, or D-Sub. It specifies the mechanical outline, pin arrangement, and mating mechanism, which directly determines the req

Question 7

What is the Maximum Pressure

Accepted Answer

Maximum Pressure specifies the highest static or dynamic pressure a component, such as a sensor, valve, or fitting, can withstand continuously without failure. It is a critical safety and reliability rating, typically measured in Pascals (Pa), pounds per

Question 8

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 9

What is the Pressure Type

Accepted Answer

This parameter classifies a pressure sensor based on the physical reference used to measure the applied force. The primary types are **Gauge** (pressure relative to atmospheric), **Absolute** (pressure relative to a perfect vacuum), **Differential** (diff

Question 10

What is the Accuracy

Accepted Answer

Accuracy quantifies the maximum permissible deviation between a measured or processed value and its true or reference value, typically expressed as a percentage of full scale, a direct value (e.g., ±mV), or in parts per million (ppm). It is a fundamental

Question 11

What is the Operating Temperature

Accepted Answer

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the powe

Question 12

What is the Termination Style

Accepted Answer

This parameter specifies the physical form and connection method of a component's leads or contacts, such as through-hole, surface-mount, screw terminal, or quick-connect. It defines the required assembly process (e.g., soldering, clamping) and is critica

Question 13

What is the Voltage - Supply

Accepted Answer

The nominal DC potential difference applied to the power input pin(s) of an integrated circuit or module, measured in volts (V). It defines the required energy level for proper operation and establishes the reference for internal logic levels and analog s

Question 14

What is the Port Size

Accepted Answer

This parameter specifies the nominal dimensions of the fluid or electrical interface on a component, such as a valve, connector, or fitting. It defines the physical size and thread standard (e.g., NPT, G-thread) or key diameter (e.g., for optical or RF po

Question 15

What is the Applications

Accepted Answer

This parameter describes the specific electronic systems, circuits, or end-use products for which a component is designed and validated. It guides engineers in selecting parts that are functionally appropriate, meet environmental and regulatory requiremen

Question 16

What is the Output Type

Accepted Answer

Output Type describes the configuration of the amplifier's output stage, such as Rail-to-Rail, which can swing close to both power supply rails, or a more traditional design with a defined voltage headroom near each rail.

Question 17

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 18

What is the Output

Accepted Answer

This parameter specifies the electrical signal or power delivered by a component, circuit, or system to its external load or subsequent stage. It defines the essential result of the device's operation, characterized by metrics such as voltage, current, po

TE Connectivity Measurement Specialties 2000314

M3021-000005-2K5PG

M3031-000005-100PG

M3031-000005-2K5PG

M3041-000005-100PG

M3041-000005-2K5PG

2000295

2000296

2000314

2000330

2000519