Name: 45-441238 FLEX HEATER POLYIMIDE 12" WIRE
Brand: TurboFlex Heaters
SKU: 45-441238
Price: 71.25 USD
Availability: InStock
Rating: 4.9 (2 reviews)

Question 1

What is the Mfr

Accepted Answer

Mfr refers to the component's producing company, whose brand and manufacturing processes directly impact the component's performance, consistency, and traceability, making it a key reference during selection.

Question 2

What is the Series

Accepted Answer

Series indicates a manufacturer’s organized range of components, often named with a common prefix or code, to streamline product selection and ensure compatibility across similar models.

Question 3

What is the Package

Accepted Answer

his term denotes the protective casing (often made of plastic, ceramic, or metal) that encapsulates an integrated circuit, determining its size, reliability, and suitability for different mounting technologies like through-hole or SMT.

Question 4

What is the Thickness

Accepted Answer

Thickness is a fundamental linear dimension specifying the distance between two parallel surfaces of a component or material, typically measured in millimeters (mm) or inches (in). It is a critical mechanical parameter that directly influences structural

Question 5

What is the Type

Accepted Answer

This parameter categorizes a component based on its fundamental operating principle, internal structure, or primary application domain. It serves as the highest-level identifier, grouping devices with shared core characteristics—such as "N-Channel MOSFET,

Question 6

What is the Width

Accepted Answer

Width refers to the lateral dimension of an electronic component, measured perpendicular to its length and height. It is a critical physical parameter that defines the component's footprint on a printed circuit board (PCB) and influences layout density, m

Question 7

What is the Product Status

Accepted Answer

Product Status indicates the commercial availability and production stage of the component, such as Active, Not for New Design (NRND), Obsolete, or Last Time Buy (LTB).

Question 8

What is the Resistance

Accepted Answer

A fundamental property of materials that impedes the flow of electric current, measured in Ohms (Ω). It is a core parameter used to limit current, divide voltage, dissipate power as heat, and set time constants in RC circuits. Its value is determined by t

Question 9

What is the Watt Density @ 12V

Accepted Answer

A measure of the power dissipated per unit area of a resistive heating element or surface when operated at a nominal 12-volt supply, typically expressed in watts per square inch (W/in²) or watts per square centimeter (W/cm²). This parameter is critical fo

Question 10

What is the Temperature Rating

Accepted Answer

Specifies the ambient or operating temperature range within which a component is guaranteed to meet its published electrical and mechanical specifications. This range, typically expressed as a minimum and maximum in degrees Celsius (°C), is critical for e

Question 11

What is the Power (Watts)

Accepted Answer

This parameter quantifies the rate of energy transfer or conversion within an electronic component or system, measured in Watts (W). It defines the maximum continuous power a device can safely dissipate as heat or deliver to a load, serving as the primary

Question 12

What is the Color

Accepted Answer

A visual attribute determined by the wavelength of light reflected or emitted, used for rapid identification, polarity marking, functional grouping (e.g., resistor bands, LED emission, wire jackets), and status indication of components within a system.

Question 13

What is the Termination

Accepted Answer

The specific method and hardware used to establish a permanent or semi-permanent electrical and mechanical connection at the end of a wire, cable, or component lead. Common methods include soldering, crimping, screw clamping, insulation displacement, and

Question 14

What is the Features

Accepted Answer

These are the additional, non-core capabilities or characteristics integrated into a component beyond its primary function. They enhance performance, reliability, or ease of use, such as built-in protection (thermal shutdown, overcurrent), enable/disable

Question 15

What is the Attachment Method

Accepted Answer

The specific mechanical means by which a component or assembly is physically secured to a substrate, chassis, or another part. This includes techniques such as adhesive bonding, screw fastening, snap-fitting, press-fitting, or welding. The chosen method i

Question 16

What is the Voltage

Accepted Answer

A fundamental electrical quantity representing the potential difference or electromotive force between two points in a circuit, measured in volts (V). It is the driving force that causes electric charge to flow, establishing current. In component specific

Question 17

What is the Approval Agency

Accepted Answer

A designated organization that validates a component's compliance with specific safety, performance, or environmental standards (e.g., UL, CE, CSA). This certification is a mandatory requirement for market access, ensuring the product meets regional regul

Question 18

What is the Material

Accepted Answer

The specific substance or combination of substances from which a component is primarily fabricated. This fundamental specification determines key physical, electrical, and thermal properties, including conductivity, resistivity, mechanical strength, therm

Question 19

What is the Diameter

Accepted Answer

A fundamental linear dimension specifying the width of a circular or cylindrical object, such as a wire, connector, shaft, or lens. It is a critical geometric parameter that determines mechanical fit, current-carrying capacity, optical properties, and spa

Question 20

What is the Length

Accepted Answer

Length refers to the linear dimension of a component along its primary axis, typically measured in millimeters (mm) or inches (in). It is a fundamental physical parameter that defines the component's spatial footprint, influences mechanical fit within an

Question 21

What is the Wire Gauge

Accepted Answer

A standardized system for specifying the diameter or cross-sectional area of an electrical conductor, typically defined by the American Wire Gauge (AWG) standard. It inversely relates to the numerical gauge value; a smaller AWG number indicates a larger c

Question 22

What is the Material - Insulation

Accepted Answer

A dielectric substance used to electrically isolate conductive elements, preventing current leakage and short circuits. Its primary function is to ensure operational safety and signal integrity. Key properties include dielectric strength (kV/mm), volume r

Question 23

What is the Length - Lead Wire

Accepted Answer

This parameter specifies the total linear distance of the insulated wire attached to a component (e.g., sensor, thermistor, or transducer) that is available for routing and connection to a circuit. It is a critical mechanical dimension that determines ins

Question 24

What is the Shape

Accepted Answer

The physical form or outline of a component's package, which dictates its mechanical fit, mounting compatibility, and spatial footprint on a PCB. It is a primary identifier (e.g., cylindrical, rectangular, radial, axial) that determines handling, assembly

TurboFlex Heaters 45-441238

C3400-6144A

C3200-6095A

C3200-6136

PTCB-250

53-183457

53-441237

45-441238

45-161238

45-265680

53-304568